Carter Hoffmann

Millboard insulation Four legs with adjustable rubber foot mounted to base of cabinet Built-in, removable aluminum pan lids Electronic temperature controls with countdown timers and audio/visual alarm. Specifications Model MC223S-2T Width 17.25 Inches Depth 14.68 Inches Height 14.12 Inches Voltage 120 Volts Wattage 500 Watts Hertz 60 Hertz Amp 4.2 Amps Phase Single Pan Capacity 2 Half-Size Pan Display Type 4-Digit LED Digital Display Control Type Electronic Control Heating Temperature Up To 195°F / 91°C Timer Up To 9 Hour, 59 Minutes Construction Double Wall Stainless Steel Product Type Food Holding Cabinet NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards.

Recessed manual dial control for easy temperature setting; digital thermometer Removable, bottom mounted blower heater, capable of heating to 190°F (88°C); pre-heat to 160°F (71°C) in approximately 30 minutes Single wall, non-insulated aluminum construction; .063 exterior with 2V finish; .125 natural aluminum base frame Single-pane, tempered glass door set in extruded aluminum frame with santoprene gasket; heavy-duty edge mounted, chrome-plated latch with magnetic catch 5” diameter casters with rubber tread, all-swivel, two fitted with brakes; adjustable edge mount hinges with chrome plate finish Adjustable, removable tray racks with universal wire slides; fixed pacing at 3” Accommodates 12”x20”x2.5” steam table pans, 18”x26” sheet pans and GN 2/1 or 1/2 pans Description hotLOGIX HL1 Series Heated Food Holding Cabinets are designed to hold cooked food warm and ready for serving. They are constructed of lightweight, sturdy aluminum and feature a removable bottom-mounted heating module with recessed dial control. They come in under-counter, half height, ¾ height and full height. hotLOGIX holding cabinet with fixed wire slides for 12”x20”x2.5” or 18”x26” pans on adjustable, removable racks. Aluminum interior and exterior, single wall, non-insulated construction with removable blower heating module. Capable of heating to 190°F (88°C). 5” diameter rubber casters; 2 with brakes. Single panel tempered glass door with magnetic latch. Single electric connection, 120 volts, 1750 watts,15.0 amps, 60 Hz, single phase, eight foot rubber cord with grounding plug, NEMA 5-20P. Read more Specifications Specifications Model HL1-18 Width 24.68 Inches Depth 29.5 Inches Height 70.62 Inches Pan Capacity (36) 12" x 20" (18) 18" x 26" Inside Working Height 54.5 Inches Caster Diameter 5 Inches Voltage 120V, 1 Ph, 60Hz Power Comsumption 1750 Watts Amperage 15.0 Amps Connection Single Product Type Holding Cabinet ETL Certified Determined through independent testing and periodic follow-up inspections by NRTL. This item meets North American product safety standards and published industry standards. ETL Sanitation List This item demonstrates compliance to North American sanitation standards Made in America This product was made in United States of America. 5-20P This product comes with a NEMA 5-20P plug. Files Spec Sheet

Whether it's across the hall, on the other side of your facility, or down the street, our transport carts are ready for just about anything. They're ideal for bulk food holding, transport and backup for buffet lines and are built for the rigors of transporting. They feature with turned in seam unibody construction, wheel ahead caster configuration and wrap-around bumpers. Under-counter, 1/2, 3/4 and full height cabinets Removable blower heating systems with fast heat up and recovery Carts for 12" x 20" steam table pans, 18" x 26" sheet pans, or both Specifications Model PH1830 Width 30.62 Inches Depth 36 Inches Height 71 Inches Voltage 120 Volts Wattage 1,650 Watts Hertz 60 Hertz Amp 13.7 Amps Phase Single Pan Capacity 32 Full-Size Pan Control Type Dial Thermometer Control Temperature Range Up to 200°F / 93°C Heat Up Time 25 Minutes Number of Door 1 Material Construction Heavy-Duty Stainless Steel Product Type Food Holding Cabinet NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. CE Certified This item has been assessed and meets health, safety, and environmental requirements set by CE. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. CSA Certified This item has been certified by the Canadian Standards Association. 5-15P This product comes with a NEMA 5-15P plug.

Logix2 cabinets are designed for the budget-conscious, with lightweight, sturdy aluminum construction. Logix2 cabinets are perfect for the operator looking for a versatile holding and proofing cabinet. Unlike many other heater proofers on the market, they have humidity in both the proofer mode AND the heater mode. Bottom-mounted removable heating unit with water reservoir. Active humidification for proofing and humidified holding Recessed manual dial controls for temperature and humidity settings Cabinets may be operated with or without humidity All aluminum construction under-counter, 1/2 size, 3/4 size and full size cabinets Single-pane tempered glass door set in extruded aluminum frame is standard Specifications Model HL2-18 Width 24.68 Inches Depth 29.5 Inches Height 70.62 Inches Voltage 120 Volts Wattage 2,100 Watts Hertz 60 Hertz Amp 17.5 Amps Phase Single Pan Capacity 36 Full-Size Pan Control Type Analog Control Display Type Digital Thermometer Display Temperature Range Up To 190°F / 88°C Insulated No Number of Door 1 Magnetic Latch Yes Material Construction Stainless Steel Product Type Food Holding Cabinet ETL Certified Determined through independent testing and periodic follow-up inspections by NRTL. This item meets North American product safety standards and published industry standards. ETL Sanitation List This item demonstrates compliance to North American sanitation standards 5-20P This product comes with a NEMA 5-20P plug.

Logix7 holding cabinets are great for holding pans of covered foods for extended times. These cabinets are ideal for holding covered foods or uncovered crispy foods. Recessed dial temperature control Gently circulated air for even heat distribution throughout the cabinet Field reversible doors All stainless steel, insulated construction, with adjustable universal tray slides Cabinets have adjustable universal tray slides; fixed angle slides are optional HL7-1812 features Dutch doors, a full perimeter wrap-around bumper and transport latches for transporting Specifications Model HL7-1812 Width 31.37 Inches Depth 36.62 Inches Height 76.37 Inches Voltage 120 Volts Hertz 60 Hertz Wattage 2100 Watts Amp 17.5 Amps Phase Single Pan Capacity 24 Full-Size Pan Control Type Analog Control Display Type Analog Display Heat Temperature 85 - 200°F / 30 - 93°C Heat Up Time 25 Minutes Number of Door 2 Magnetic Door Latch Yes Material Construction Stainless Steel Product Type Food Holding Cabinet UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. UL Classified EPH Complies with UL safety standards and ANSI/NSF standards. 5-20P This product comes with a NEMA 5-20P plug.

All have a removable, washable filter to protect components from oils and vapors, removable food bay and dividers for holding several items at the same time. Welded cabinet construction with outer cabinet welded to cabinet liner All stainless steel construction Dishwasher-safe filter Forced air heating system 120 volts, 1820 watts, 15.1 amps, 60 Hz, single phase. NEMA 5-20P Specifications Model CNH18XD Width 17.56 Inches Depth 33 Inches Height 17.75 Inches Voltage 120 Volts Wattage 1,820 Watts Amps 15.1 Amps Hertz 60 Hertz Phase Single Capacity 1,306 Cubic Inches Number of Sections 3 Sections Heating Temperature 190°F / 88°C Heating Time 10 Minutes Product Type Food Holding Station NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. 5-20P This product comes with a NEMA 5-20P plug.

All have a removable, washable filter to protect components from oils and vapors, removable food bay and dividers for holding several items at the same time. Welded cabinet construction with outer cabinet welded to cabinet liner All stainless steel construction Dishwasher-safe filter Forced air heating system 120 volts, 1820 watts, 15.1 amps, 60 Hz, single phase. NEMA 5-20P Specifications Model CNH18 Width 17.56 Inches Depth 29 Inches Height 17.75 Inches Voltage 120 Volts Wattage 1,820 Watts Amps 15.1 Amps Hertz 60 Hertz Phase Single Capacity 837 Cubic Inches Number of Sections 3 Sections Heating Temperature 190°F / 88°C Heating Time 10 Minutes Product Type Food Holding Station NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. 5-20P This product comes with a NEMA 5-20P plug.