Single Rack Dishwasher

Hot water sanitizing Uses 0.85 gallons of water per rack Cleans 58 racks in an hour 60-240 seconds per cycle (depending on setting) 17" door opening 8.5 kW built-in booster heater 208-240V / 60 Hz / 3 Phase Description Quickly and efficiently clean and sterilize racks of dishes, glassware, pots and pans, and utensils with the Hobart Stero SD3-2 Door-Type Dishwasher with Built-In Booster Heater. This powerful and energy efficient door-type dishwasher uses only 0.85 gallons of water per rack and has the ability to clean 58 racks per hour. Three timed wash cycles of 1, 2, or 4 minutes help give you the most effective clean. An 8.5 kW built-in booster heater ensures minimum temperatures of 180 ° F for the final rinse cycle. This door-type warewasher is constructed out of stainless steel and features interchangeable upper and lower wash and rinse arms. It’s equipped with clear digital controls that let you select between cycle lengths as well as deliver error notifications in case of a problem. The dishwasher has a large 17-inch door opening to accommodate a variety of dishes and cookware including large pots and pans. Read more Specifications Specifications Model SD3-2 Width 28.75 inches Depth 34 inches Height 66.5 inches Voltage 208-240V Hertz 60 Hz Phase 3 Phase Rated Amps 45.4 Amps (With Electric Heat & Booster) Heating Unit 5 kW Booster Heater 8.5 kW Racks per Hour 58 Wash Cycle Time 60-240 seconds Water Usage 0.85 gal Water Temperature 180°F Door Opening 16.87 inches Dishwasher Type Door-Type Type Single Rack Dishwasher NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. Energy Star Partner This item meets strict energy performance standards set by EPA. Highly energy efficient making it less expensive to operate. Bare Wire This product comes bare wire and must be hardwired. There is no standard plug. Files Spec Sheet

Connection to a minimum 55°C water supply 1 peg rack, 1 flat rack & 1 cutlery tray included 3 washing programs available Automatic fill and drain features for convenience Durable 304 stainless steel construction Ideal for restaurants, cafeterias, and other food service establishments Description The Nella 26" Upright High-Temperature Dishwasher is a powerful and efficient cleaning solution for any commercial kitchen. With its sleek and modern design, this dishwasher not only delivers superior cleaning performance but also adds a touch of sophistication to your kitchen space. Equipped with digital controls, this dishwasher offers a user-friendly and customizable experience. The controls allow you to adjust the wash cycle, water temperature, and other settings to meet your specific cleaning needs, ensuring spotless and sanitized dishes every time. This dishwasher is designed for high-temperature washing, providing a thorough and hygienic clean. It can reach temperatures of up to 72°C/161°F, effectively removing tough stains and germs from your dishes. This makes it ideal for use in busy restaurants, hotels, and other commercial establishments where hygiene is of utmost importance. Measuring 26" in width, this upright dishwasher is compact yet spacious enough to accommodate a large load of dishes in one cycle. It also comes with adjustable racks, allowing you to fit in dishes of various sizes and shapes, making it a versatile and convenient choice for any kitchen. Read more Specifications Specifications Model 46797 Width 26 Inches Depth 29.6 Inches Height with Door Open 74 Inches Height with Door Closed 57 Inches Voltage 208-240V Hertz 60 Hz Phase 1 pH Amps 44A Flow Pressure 20 psi + 5 Wash Pump Motor Horsepower 1.5 HP Racks per Hour 14 - 28 Racks Per Hour Wash Cycle 103 - 223 Seconds Rinse Cycle 16 Seconds Washing & Rinsing Temperature 72 °C / 161 °F Water Pressure Requirements 30 - 72 PSI Water Per Rack 0.7 Gallons (2nd program) Electric Heating Unit(Booster Tank) 7.5 kW Electric Heating Unit(Wash Tank) 6 kW Water Inlet Connection 3/4 Inches Drain Connection 1.2 Inches Capacity(Booster Tank) 7.4 L Capacity(Wash Tank) 68 L Power Type Electric Material 304 Stainless Steel Product Type Single Rack Dishwasher ETL Certified Determined through independent testing and periodic follow-up inspections by NRTL. This item meets North American product safety standards and published industry standards. NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. Files Instruction Manual Spec Sheet Parts Breakdown Technical Drawings

Cleans 58-63 racks/hour using only 4.04L of water per rack Automatic tank fill Single 57 second wash cycle 17.25" vertical chamber clearance 70°F rise built-in booster heater FIeld convertible from straight-thru to corner (kit required) Description Meet the NXP-HTD. It’s a powerful, single-cycle high temperature sanitizing door-type that provides Clean the First Time® results! The NXP-HTD features automatic tank fill, door-actuated start, a built-in booster heater with Sani-Sure™ final rinse system, digital temperature display, delime cycle, interchangeable upper and lower wash/rinse arms, vent fan control, and a generous 17.25″ vertical chamber clearance. Designed to clean 63 racks of dishes per hour, the Jackson NXP-HTD warewashing system has a 57-second single automatic cycle. Its pull-down door starts the washing cycle and a digital temperature display located on top of the unit provides ongoing information to the operator, ensuring functional operation. Stainless steel nozzles deeply clean the dishware; the upper and lower wash and rise arms are interchangeable to maintain effective cleaning functions. After general cleaning, the 20-inch-wide by 20-inch-deep racks are finally washed with a Sani-Sure™ final rinse system. The Jackson NXP-HTD commercial warewashing system's 17.25" vertical chamber clearance helps prevent dish jamming, reducing breakage. A large scrap basket located on the bottom of the unit collects leftover food, particles, and can be removed for emptying and cleaning. The tank automatically fills; its rise booster heater is built in and operates at 70 degrees Fahrenheit. When the unit becomes idle, its vent fan will shut off to conserve energy. If temperatures become too hot during operation, the unit alerts the operator and turns off; it also notifies the operator when water levels are too low. Overall, the unit is 30 5⁄8" wide, 29" deep, and 64" high. Features: Electric tank heat Cleans 63 (58)* racks per hour using only 0.89 gallons of water per rack Built-in booster heater with Sani-Sure™ final rinse system ensures proper sanitization is achieved every cycle Single 57-second automatic cycle Automatic tank fill Door-actuated start Digital temperature display Delime cycle 17.25″ vertical chamber clearance Interchangeable upper and lower wash/rinse arms 1 hp stainless steel wash pump motor Vent fan control shuts the vent fan off when machine is idle, saving energy Top mounted controls for ease of operation Large scrap basket Single point connections for all utilities Field convertible from straight-through to corner and vice versa (kit required) Field phase conversion capable (kit required) Low watt density electric wash tank heater Hi-limit thermostat and low water protection Detergent/rinse additive signal connection fuse box Adjustable bullet feet Uses standard 20″ x 20″ (508 mm x 508 mm) racks Read more Specifications Specifications Model NXP-HTD Width 30.625 Inches Depth 29 Inches Height 64 Inches Voltage 208 V Hertz 60 Hz Phase 3 pH Racks Per Hour 58-63 Wash Cycle Time 57 Seconds Vertical Chamber Clearance 17.25 Inches Compatible Rack 20" x 20" rack Wash Pump Motor 1 HP Wash Tank Capacity 8 gal (30 L) Booster Tank Capacity 1.66 gal (6.29 L) Product Type Single Rack Dishwasher ETL Certified Determined through independent testing and periodic follow-up inspections by NRTL. This item meets North American product safety standards and published industry standards. Energy Star Partner This item meets strict energy performance standards set by EPA. Highly energy efficient making it less expensive to operate. Files Spec Sheet

Cleans 58-63 racks/hour using only 4.04L of water per rack Automatic tank fill Single 57 second wash cycle 17.25" vertical chamber clearance 70°F rise built-in booster heater FIeld convertible from straight-thru to corner (kit required) Description Meet the NXP-HTD. It’s a powerful, single-cycle high temperature sanitizing door-type that provides Clean the First Time® results! The NXP-HTD features automatic tank fill, door-actuated start, a built-in booster heater with Sani-Sure™ final rinse system, digital temperature display, delime cycle, interchangeable upper and lower wash/rinse arms, vent fan control, and a generous 17.25″ vertical chamber clearance. Designed to clean 63 racks of dishes per hour, the Jackson NXP-HTD warewashing system has a 57-second single automatic cycle. Its pull-down door starts the washing cycle and a digital temperature display located on top of the unit provides ongoing information to the operator, ensuring functional operation. Stainless steel nozzles deeply clean the dishware; the upper and lower wash and rise arms are interchangeable to maintain effective cleaning functions. After general cleaning, the 20-inch-wide by 20-inch-deep racks are finally washed with a Sani-Sure™ final rinse system. The Jackson NXP-HTD commercial warewashing system's 17.25" vertical chamber clearance helps prevent dish jamming, reducing breakage. A large scrap basket located on the bottom of the unit collects leftover food, particles, and can be removed for emptying and cleaning. The tank automatically fills; its rise booster heater is built in and operates at 70 degrees Fahrenheit. When the unit becomes idle, its vent fan will shut off to conserve energy. If temperatures become too hot during operation, the unit alerts the operator and turns off; it also notifies the operator when water levels are too low. Overall, the unit is 30 5⁄8" wide, 29" deep, and 64" high. Features: Electric tank heat Cleans 63 (58)* racks per hour using only 0.89 gallons of water per rack Built-in booster heater with Sani-Sure™ final rinse system ensures proper sanitization is achieved every cycle Single 57-second automatic cycle Automatic tank fill Door-actuated start Digital temperature display Delime cycle 17.25″ vertical chamber clearance Interchangeable upper and lower wash/rinse arms 1 hp stainless steel wash pump motor Vent fan control shuts the vent fan off when machine is idle, saving energy Top mounted controls for ease of operation Large scrap basket Single point connections for all utilities Field convertible from straight-through to corner and vice versa (kit required) Field phase conversion capable (kit required) Low watt density electric wash tank heater Hi-limit thermostat and low water protection Detergent/rinse additive signal connection fuse box Adjustable bullet feet Uses standard 20″ x 20″ (508 mm x 508 mm) racks Read more Specifications Specifications Model NXP-HTD Width 30.625 Inches Depth 29 Inches Height 64 Inches Voltage 240 V Hertz 60 Hz Phase 1 pH Racks Per Hour 58-63 Wash Cycle Time 57 Seconds Vertical Chamber Clearance 17.25 Inches Compatible Rack 20" x 20" rack Wash Pump Motor 1 HP Wash Tank Capacity 8 gal (30 L) Booster Tank Capacity 1.66 gal (6.29 L) Product Type Single Rack Dishwasher ETL Certified Determined through independent testing and periodic follow-up inspections by NRTL. This item meets North American product safety standards and published industry standards. Energy Star Partner This item meets strict energy performance standards set by EPA. Highly energy efficient making it less expensive to operate. Files Spec Sheet

Cleans 58-63 racks/hour using only 4.04L of water per rack Automatic tank fill Single 57 second wash cycle 17.25" vertical chamber clearance 70°F rise built-in booster heater FIeld convertible from straight-thru to corner (kit required) Description Meet the NXP-HTD. It’s a powerful, single-cycle high temperature sanitizing door-type that provides Clean the First Time® results! The NXP-HTD features automatic tank fill, door-actuated start, a built-in booster heater with Sani-Sure™ final rinse system, digital temperature display, delime cycle, interchangeable upper and lower wash/rinse arms, vent fan control, and a generous 17.25″ vertical chamber clearance. Designed to clean 63 racks of dishes per hour, the Jackson NXP-HTD warewashing system has a 57-second single automatic cycle. Its pull-down door starts the washing cycle and a digital temperature display located on top of the unit provides ongoing information to the operator, ensuring functional operation. Stainless steel nozzles deeply clean the dishware; the upper and lower wash and rise arms are interchangeable to maintain effective cleaning functions. After general cleaning, the 20-inch-wide by 20-inch-deep racks are finally washed with a Sani-Sure™ final rinse system. The Jackson NXP-HTD commercial warewashing system's 17.25" vertical chamber clearance helps prevent dish jamming, reducing breakage. A large scrap basket located on the bottom of the unit collects leftover food, particles, and can be removed for emptying and cleaning. The tank automatically fills; its rise booster heater is built in and operates at 70 degrees Fahrenheit. When the unit becomes idle, its vent fan will shut off to conserve energy. If temperatures become too hot during operation, the unit alerts the operator and turns off; it also notifies the operator when water levels are too low. Overall, the unit is 30 5⁄8" wide, 29" deep, and 64" high. Features: Electric tank heat Cleans 63 (58)* racks per hour using only 0.89 gallons of water per rack Built-in booster heater with Sani-Sure™ final rinse system ensures proper sanitization is achieved every cycle Single 57-second automatic cycle Automatic tank fill Door-actuated start Digital temperature display Delime cycle 17.25″ vertical chamber clearance Interchangeable upper and lower wash/rinse arms 1 hp stainless steel wash pump motor Vent fan control shuts the vent fan off when machine is idle, saving energy Top mounted controls for ease of operation Large scrap basket Single point connections for all utilities Field convertible from straight-through to corner and vice versa (kit required) Field phase conversion capable (kit required) Low watt density electric wash tank heater Hi-limit thermostat and low water protection Detergent/rinse additive signal connection fuse box Adjustable bullet feet Uses standard 20″ x 20″ (508 mm x 508 mm) racks Read more Specifications Specifications Model NXP-HTD Width 30.625 Inches Depth 29 Inches Height 64 Inches Voltage 208 V Hertz 60 Hz Phase 1 pH Racks Per Hour 58-63 Wash Cycle Time 57 Seconds Vertical Chamber Clearance 17.25 Inches Compatible Rack 20" x 20" rack Wash Pump Motor 1 HP Wash Tank Capacity 8 gal (30 L) Booster Tank Capacity 1.66 gal (6.29 L) Product Type Single Rack Dishwasher ETL Certified Determined through independent testing and periodic follow-up inspections by NRTL. This item meets North American product safety standards and published industry standards. Energy Star Partner This item meets strict energy performance standards set by EPA. Highly energy efficient making it less expensive to operate. Files Spec Sheet

Made of durable stainless steel material Capacity of 9 grids Includes a built-in detergent dispenser for added convenience Easy to use with a simple on/off switch and temperature control knob Saves time and energy with its quick and thorough cleaning process Suitable for use in commercial kitchens, restaurants, and catering businesses Meets all safety and hygiene standards for food service equipment Description The CLEANING TANK is designed to let you clean the grill racks of the GRESILVA® HORIZONTAL GRILL more simply and effectively. Easy to use, you just have to fill the tank with a mixture of water and a suitable product and immerse the grill racks whenever they are not being used. Crafted from durable stainless steel, this washing tank is built to last and can withstand heavy use in any kitchen setting. Its sleek and compact design allows for easy storage and its sturdy construction ensures long-lasting performance. Whether you are a professional chef or a home cook, this washing tank is a must-have tool for keeping your grills in pristine condition. Read more Specifications Specifications Model TV9 Width 13.18 Inches Depth 18.7 Inches Height 38.9 Inches Capacity without grids: 135L With grids: 129 L Number of Grids 9 Product Type Grids Washer Files Spec Sheet

Multiple-cycle operations allow you to wash different soil levels in the the upper & lower section Independent wash chambers increase capacity & help ensure consistent rinse performance on every cycle Sense-A-Temp™ Booster helps to ensure 180° sanitizing rinse on every cycle Insulated 5-Sided Hood & Lower Door help reduce heat gain in the dishroom Pillarless Design makes loading, unloading & cleaning easier Extended cycle times on the bottom tackle heavy food soils & cutlery Description The Hobart AMTL Two Level Door-Type Dishwasher is a powerful and efficient solution for commercial kitchens looking to streamline their dishwashing process. This high-performance machine offers two levels of washing capabilities, making it a perfect choice for larger establishments. With a compact design, the AMTL Two Level Door-Type Dishwasher fits comfortably into any kitchen space and is easy to operate, making it ideal for even the busiest of kitchens. The AMTL Two Level Door-Type Dishwasher features a stainless steel construction, ensuring durability and longevity, while the powerful wash system and high-temperature sanitizing rinse provide a thorough and hygienic clean. The machine's easy-to-use controls, automatic detergent and rinse aid dispensers, and simple operation make it a hassle-free solution for any kitchen. Additionally, the AMTL Two Level Door-Type Dishwasher is energy-efficient, with a low water consumption rate, ensuring that it is both cost-effective and environmentally friendly. Whether you're looking for a powerful, efficient and reliable dishwashing solution, the Hobart AMTL Two Level Door-Type Dishwasher is an excellent choice for your establishment. Read more Specifications Specifications Model AM-LT Width 28 inches Depth 36 inches Height 59.63 inches Voltage 208-240V Hertz 60 Hz Phase 3 Phase Amps 21.7 Amps Heating Unit 9 kW Racks per Hour 80 Wash Cycle Time 6-minute cycle Water Usage per Rack 0.62 gal Number of Chambers 2 Door Opening 16.87 inches Dishwasher Type Door-Type Type Double Rack Dishwasher UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. Files Spec Sheet

Washes 51 racks per hour Uses 0.86 gal. of water per rack (43.90 gallons per hour) Top-mounted user interface with digital temperature display Door-type model Durable stainless steel construction 1 standard cycle and 1 extended cycle option Automatic pumped drain Automatic fill Description The Centerline by Hobart CDL-1 commercial dishwasher is a door-type model with a 4-gallon wash tank; it uses 0.86 gallons of water per rack for each cycle. Depending on soil levels and time requirements, operators can choose between a standard or extended cycle, and for streamlined operation in fast-paced environments, it fills automatically and has an automatic pumped drain. It features a top-mounted user interface with a digital temperature display, and this unit includes one peg rack and one combination rack. To extend its service life in busy commercial kitchens, the Centerline by Hobart CDL-1 dishwashing machine is made of strong, rust-resistant stainless steel and features a stainless steel scrap basket that can be removed for cleaning. For thorough washing and rinsing, it's built with tri-prong, snap-in revolving upper and lower anti-clogging wash and rinse arms. This unit sanitizes chemically, so it doesn't require a temperature booster. Overall, it measures 241⁄8 inches wide by 2513⁄16 inches deep by 6215⁄16 inches high. Read more Specifications Specifications Model CDL Width 24.12 Inches Depth 29.81 Inches Height with Door Open 82.06 Inches Height with Door Closed 62.93 Inches Voltage 120V Hertz 60 Hz Phase 1 Amps 17.1 Amps Wash Pump Motor Horsepower 0.52 hp Racks Per Hour 51 Water Per Rack 0.86 gallons Electric Heating Unit 2 kW Water Connection 3/4 Inches Drain Connection 19 mm Barb Fitting Power Type Electric Product Type Dish Machine Energy Star Partner This item meets strict energy performance standards set by EPA. Highly energy efficient making it less expensive to operate. NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. Files Spec Sheet Manual

Door-type design Uses low-temperature water and chemicals for sanitation Minimum temperature: 120 degrees F (140 degrees F recommended) Uses only 1.7 gallons of water per rack Cleans up to 37 racks per hour Field adjustable from straight to corner operation All stainless steel construction 3/4 HP, 3450 RPM pump motor, 45 GPM 120/60/1 electrical configuration Self-flushing stainless steel pump strainer. Large scrap accumulator Exclusive de-liming cycle Description The Hobart LT1-1 low-temp chemical sanitizing dishwasher is perfect for cleaning everything from delicate wine glasses to grimy pots. It's capable of washing up to 37 racks per hour, using only 1.7 gallons of water per rack. The solenoid operated positive seating drain valve opens and closes to reduce water waste, while the high-pressure all stainless steel revolving upper and lower rinse arms power your dishes clean with as little water as possible. The Hobart LT1-1 low-temp chemical sanitizing dishwasher comes complete with a chemical sensing device to provide notification when there are no chemicals left in the included detergent, rinse aid, and sanitizer pumps. Plus, this unit comes with an exclusive de-liming cycle that helps to keep it operating at optimum levels to make sure your dishes always come out clean and sanitary. For lasting durability, this low-temp chemical sanitizing dishwasher features a self-flushing stainless steel pump strainer and scrap accumulator to make it easy to clean and maintain, as well as an all stainless steel tank, chamber, doors, and frames. With 120/60/1 electrical configuration. This unit features a 3/4 hp 3450 RPM pump motor with a rate of 45 GPM. Read more Specifications Specifications Model LT1-1 Width 28.63 Inches Depth 24.94 Inches Height 68.87 Inches Hertz 60 Hertz Phase 1 Phase Voltage 120 Volts Dishwasher Style Straight / Corner Features Chemical Pumps High or Low Temperature Low Temp Horsepower 3/4 HP Minimum Water Inlet Temperature 120 Degrees F (140 Recommended) Plug Type Hardwire Racks Per Hour 37 Type Single Rack Wash Cycle Time 82 Seconds Water Inlet Size 3/4 Inches Water Usage 1.7 Gallons Per Rack UL Certified Certified by Underwriters Laboratories, this product has been stringently tested and meets safety standards. Made in America This product was made in United States of America. NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. Files SPEC SHEET

Ventless heat recovery uses steam to heat incoming water instead of releasing it in the dish room Door safety switch prevents burns due to opening during operation Includes 1 peg rack and 1 flat rack to hold soiled wares Up to 40 racks/hr; 0.73 gal/rack; 4 different wash cycles Auto Start - starts unit when hood is closed High efficiency 2 HP pump Built-in booster configured to ensure 180° rinse Dual NSF listed as both a dishwasher and potwasher Detergent/chemical connection provisions Interchangeable upper and lower spray arms Water pressure regulating valve (unmounted) Automatic drain valve - drains wash tank when power is off PRV (Mounted Pressure Reducing Valve) Stainless steel enclosure panels Interchangeable upper and lower spray arms Low-water tank heat cut-off Description Streamline your dishwashing operation with the Champion DH6000T-VHR door-type high temperature dishwashing machine with booster and ventless heat recovery. With one included peg rack and one flat rack this machine is great for just about any soiled wares, and is also pot and pan rated. A large 27" opening can accommodate trays, pans, and 60 quart mixing bowls. Its heavy-duty construction includes a stainless steel booster and enclosure panels, making it ideal to hold up to the wear and tear of busy commercial kitchens. The built-in electric booster can raise incoming water temperatures by 70 degrees Fahrenheit for a 180 degree rinse cycle. This machine can complete a full cleaning cycle in just 90 seconds and cleans up to 40 racks per hour. It uses only 0.73 gallons of water per rack. It also has a pot & pan mode with 2.5, 4.5, and 6.5 minute cycles. The ventless heat recovery system recovers and transfers heat and water vapor back to the booster so it does not have to use as much electricity for heating. Featuring both an automatic tank fill, and automatic drain valve, this machine is simple to operate without requiring constant monitoring by the user. A water pressure regulating valve ensures that you are receiving the appropriate level or pressure while washing. To prevent opening the door during operation, a door safety switch locks the door to avoid potential burns from steam and hot water. A low-water tank heat cut-off will help prevent overheating of the dishwasher which could result in operational failure. This unit requires a 208-240V, 3 phase electrical connection for operation. Read more Specifications Specifications Model DH6000T-VHR Width 33.93 Inches Depth 31.62 Inches Height 96.75 Inches Voltage 208 - 240V Hertz 60 Hz Phase 1 Phase or 3 Phase Capacity 10 Gal Wash Cycle Time 36 , 94, 214, 334 Seconds Wash Temperature 150 Degrees F / 65 Degrees C Rinse Temperature 180 Degrees F / 82 Degrees C Racks Per Hour 40 Racks/Hour Motor Horsepower 2 HP Booster Wattage 7.5 kW Product Type Single Rack Dishwasher - Ventless UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. Energy Star Partner This item meets strict energy performance standards set by EPA. Highly energy efficient making it less expensive to operate. Made in America This product was made in United States of America. Files Spec Sheet Installation Guide

Heavy-duty construction includes stainless steel enclosure panels Large 27" opening can accommodate sheet pans, trays, or 60 quart mixing bowl" 60 racks/hr; 0.73 gal/rack; 4 different wash cycles Automatic tank fill and drain valve for user convenience Includes 1 peg rack and 1 flat rack to hold soiled wares With bottom mounter HMI controls High efficient 2 HP pump Built-in booster configured to ensure 180° rinse Streamline your dishwashing operation with the Champion DH6000T door-type high temperature tall hood dishwashing machine with booster. With one included peg rack and one flat rack this machine is great for just about any soiled wares, and is also pot and pan rated. A large 27" opening can accommodate trays, pans, and 60 quart mixing bowls. Its heavy-duty construction includes a stainless steel booster and enclosure panels, making it ideal to hold up to the wear and tear of busy commercial kitchens. The built-in electric booster can raise incoming water temperatures by 70 degrees Fahrenheit for a 180 degree rinse cycle. This machine can complete a full cleaning cycle in just 60 seconds and cleans up to 60 racks per hour. It uses only 0.73 gallons of water per rack. It also has a pot & pan mode with 2, 4, and 6 minute cycles. This machine can complete a full cleaning cycle in just 60 seconds and cleans up to 60 racks per hour. It uses only 0.73 gallons of water per rack. It also has a pot & pan mode with 2, 4, and 6 minute cycles. Featuring both an automatic tank fill, and automatic drain valve, this machine is simple to operate without requiring constant monitoring by the user. A water pressure regulating valve ensures that you are receiving the appropriate level or pressure while washing. To prevent opening the door during operation, a door safety switch locks the door to avoid potential burns from steam and hot water. A low-water tank heat cut-off will help prevent overheating of the dishwasher which could result in operational failure. This unit requires a 208-240V, 1 phase electrical connection for operation. Specifications Model DH6000T Width 33.94 Inches Depth 31.63 Inches Height 90.94 Inches Dishwasher Height Tall Hertz 60 Hertz Phase 1 Phase Voltage 208/240 Volts Application Dishwashers Booster Wattage 7.5 Kilowatts Dishwasher Style Straight Energy Star Qualified Yes Features Booster Heater Included High or Low Temp High Temp Horsepower 2 HP Made in America Yes NSF Listed Yes Number of Cycles 4 Cycles Plug Type Hardwire Racks Per Hour 60 Type Single Rack Wash Cycle Time 36 , 94, 214, 334 Seconds Wash Tank Capacity 10 gal. Water Inlet Size 3/4 Inches Water Temperature Wash: 150 Rinse:180 Degrees F Water Usage 0.73 Gallons Per Rack Energy Star Partner This item meets strict energy performance standards set by EPA. Highly energy efficient making it less expensive to operate. NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. UL Classified EPH Complies with UL safety standards and ANSI/NSF standards. Made in America This product was made in United States of America. 3/4" Gas Connection This unit uses a 3/4" gas inlet connection. Bare Wire This product comes bare wire and must be hardwired. There is no standard plug. Spec Sheet Manual

Factory Authorized Startup HMI – Operator Touch Screen Interface On-Board Service Diagnostics Sleep Mode – All internal heaters shut off after 4 hours idle Built-in booster configured to ensure 180° rinse Field convertible from straight to corner operation Rinse Sentry – ensures 180°F final rinse Auto start – starts unit when hood is closed Single point electrical connection Description Streamline your dishwashing operation with the Champion DH6000 door-type high temperature dishwashing machine with booster. With one included peg rack and one flat rack this machine is great for just about any soiled wares. Its heavy-duty construction includes a stainless steel booster and enclosure panels, making it ideal to hold up to the wear and tear of busy commercial kitchens. The built-in electric booster can raise incoming water temperatures by 70 degrees Fahrenheit for a 180 degree rinse cycle. This machine can complete a full cleaning cycle in just 60 seconds and cleans up to 60 racks per hour. It uses only 0.73 gallons of water per rack. It also has a pot & pan mode with 2, 4, and 6 minute cycles. Featuring both an automatic tank fill, and automatic drain valve, this machine is simple to operate without requiring constant monitoring by the user. A water pressure regulating valve ensures that you are receiving the appropriate level or pressure while washing. To prevent opening the door during operation, a door safety switch locks the door to avoid potential burns from steam and hot water. A low-water tank heat cut-off will help prevent overheating of the dishwasher which could result in operational failure. Read more Specifications Specifications Model DH6000 Width 34 Inches Depth 31.62 Inches Height 72 Inches Voltage 208-240V Amperage 77-68 Amps Phase 1 Hertz 60 Horsepower 2 Hp Time Cycle in Seconds 60 / 12 / 240 / 360 Capacity 60 Racks per Hour Material Stainless Steel NSF Listed Yes Product Type High Temperature Dishwashing Machine NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. Energy Star Partner This item meets strict energy performance standards set by EPA. Highly energy efficient making it less expensive to operate. Bare Wire This product comes bare wire and must be hardwired. There is no standard plug. Files Spec Sheet

Ventless heat recovery uses steam to heat incoming water instead of releasing it in the dishroom Heat recycling technology saves on energy costs Door safety switch prevents burns due to opening during operation Includes 1 peg rack and 1 flat rack to hold soiled wares 40 racks/hr; 0.73 gal/rack; 4 different wash cycles Description Streamline your dishwashing operation with the Champion DH6000-VHR door-type high-temperature dishwashing machine with booster and ventless heat recovery. With one included peg rack and one flat rack, this machine is great for just about any soiled wares. Its heavy-duty construction includes a stainless steel booster and enclosure panels, making it ideal to hold up to the wear and tear of busy commercial kitchens. The built-in electric booster can raise incoming water temperatures by 70°F for a 180° rinse cycle. This machine can complete a full cleaning cycle in just 90 seconds and cleans up to 40 racks per hour. It uses only 0.73 gallons of water per rack. It also has a pot & pan mode with 2.5, 4.5, and 6.5 minute cycles. The ventless heat recovery system recovers and transfers heat and water vapor back to the booster, so it does not have to use as much electricity for heating. Featuring both an automatic tank fill and an automatic drain valve, this machine is simple to operate without requiring constant monitoring by the user. A water pressure regulating valve ensures that you are receiving the appropriate level of pressure while washing. To prevent opening the door during operation, a door safety switch locks the door to avoid potential burns from steam and hot water. A low-water tank heat cut-off will help prevent overheating of the dishwasher, which could result in operational failure. This unit requires a 208-240V, 3-phase electrical connection for operation. Read more Specifications Specifications Model DH6000-VHR Width 34 Inches Depth 31.63 Inches Height 78.82 Inches Wash Tank Capacity 10 gal. Wash Cycle Time 90 - 390 Seconds Voltage 208-240 V Hertz 60 Hz Phase 3 Ph Booster Wattage 7.5 kW Horsepower 2 HP Dishwasher Style Straight Dishwasher Height Standard Features Booster Heater Included High or Low Temp High Temp Number of Cycles 4 Cycles Plug Type Hardwire Racks Per Hour 40 Water Inlet Size 3/4 Inches Water Temperature 150°F - 180°F Water Usage 0.73 Gallons Per Rack Type Single Rack, Ventless Product Type Dishwasher Made in America This product was made in United States of America. NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. Energy Star Partner This item meets strict energy performance standards set by EPA. Highly energy efficient making it less expensive to operate. UL Classified EPH Complies with UL safety standards and ANSI/NSF standards. 3/4" Gas Connection This unit uses a 3/4" gas inlet connection. Bare Wire This product comes bare wire and must be hardwired. There is no standard plug. Files Manual Spec Sheet

18" pillarless vertical door opening Racks per hour: 51 Installation: Straight-through or Corner Sanitization Method: High-Temp Recirculating design saves water compared with fill and dump dishwashers 4-sided door retains heat and saves energy Digital temperature display Description The CDH-1 is the ENERGY STAR certified High-Temp sanitizing Centerline door-type dishwasher from Hobart that will wash up to 51 racks of dishes, glassware, or utensils per hour with a Sense-A-Temp booster that ensures a 180 degree F final rinse temperature. This dishwasher can be installed as a straight-through or corner unit This machine operates at 0.73 gallons of water per rack with revolving tri-prong snap-in upper and lower anti-clogging wash and rinse arms, and a 7.9-gallon wash tank. The recirculating design on this dishwashing machine saves significant amounts of water compared with fill and dump commercial dishwashers. This Centerline series door-type dishwasher features delime notification and cycle, service diagnostics with error notifications, pumped drain, and it comes included with (1) peg rack and (1) combination rack. This dishwasher has a top-mounted user interface with a digital temperature display. There is an 18" pillarless vertical door opening with a 4-sided door that retains heat and saves energy and the machine operates with a door-actuated start. Read more Specifications Specifications Model CDH-1 Width 24.12 Inches Depth 29.81 Inches Height with Door Open 82.06 Inches Height with Door Closed 62.93 Inches Voltage 208V - 240V Hertz 60 Hz Phase 3 ph Rated Amps 35 Amps Wash Pump Motor Horsepower 0.80 hp Tank Capacity 30 L Racks Per Hour 51 Water Per Rack 0.73 gallons Wattage 6.5 kW Heating Unit Wattage 5 kW Water Connection 3/4 Inches Drain Connection 19 mm Barb Fitting Installation Straight-Through or Corner Power Type Electric NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. Energy Star Partner This item meets strict energy performance standards set by EPA. Highly energy efficient making it less expensive to operate. Files

ENERGY STAR® rated chemical sanitizing, single rack door-type dishmachine Cleans 39 racks per hour, using 1.02 gallons of water per rack Door safety switch prevents washer from being opened during a wash cycle Built-in stainless steel scrap accumulator 17 ¼” (438 mm) vertical inside clearance Cleans one glass rack at a time Top-mount electromechanical controls Three internal pumps for detergent, rinse agent, and sanitizer Self-draining stainless steel pump eliminates soil and detergent carryover between cycles Inlet, wash, and rinse operating temperature range: 120-140 degrees F Adjustable bullet feet Description The Jackson Conserve XL-E is an excellent low temperature dishwasher for your restaurant. This unit can clean 39 racks of dishes per hour to keep up with your busiest hours! It only uses 1.02 gallons of water per rack, making it a money-saver and environmentally friendly. The auto-start feature begins the cleaning cycle automatically in order to speed up your wash times. The built-in delimer function is easy to use and will keep your machine clear of hard water deposits. A removable scrap screen, built-in waste accumulator, and internal sump keep your machine working hard throughout the day. All of your chemical pumps for wash, rinse, and sanitizer are built-in to this unit, and a low-level indicator will alert you when it is time to replace your chemicals. This machine is field convertible, so it can be easily switched from a straight to a corner configuration. To streamline installation, the Conserver XL-E low-temperature dishwasher has adjustable feet, a single-point electrical connection, and a dual-point drain connection. It is also convertible from a straight-through to a corner setup and vice versa. A door safety switch prevents opening while a cycle is running, and the wash arms are interchangeable for convenience. The delimer switch runs a cycle that removes hard water deposits. The Jackson Conserver XL-E dish washer is field-convertible so you can switch your unit to best fit your needs. To do this, you will need a false panel (sold separately) Read more Specifications Specifications Model Conserver XL-E Width 33.13 Inches Depth 29.5 Inches Height 68.5 Inches Voltage 115 V Hertz 60 Hz Phase 1 Amps 11.4 Amps Horsepower 1 Hp Racks per Hour 39 Water Usage 1.02 gal per rack High or Low Temp Low Temp Dishwasher Style Straight / Corner Features Chemical Pumps Interior Clearance 18.5 Inches Minimum Water Inlet Temperature 120 Degrees F (140 Recommended) Wash Cycle Time 90 Seconds Water Inlet Temperature 120 - 140 Degrees F Water Inlet Size 0.5 Inches Energy Star Partner This item meets strict energy performance standards set by EPA. Highly energy efficient making it less expensive to operate. ETL Certified Determined through independent testing and periodic follow-up inspections by NRTL. This item meets North American product safety standards and published industry standards. Bare Wire This product comes bare wire and must be hardwired. There is no standard plug. Made in America This product was made in United States of America. NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. Files

Cleans 58-63 racks/hour using only 4.04L of water per rack Automatic tank fill Single 57 second wash cycle 17.25" vertical chamber clearance 70°F rise built-in booster heater FIeld convertible from straight-thru to corner (kit required) Description Meet the NXP-HTD. It’s a powerful, single-cycle high temperature sanitizing door-type that provides Clean the First Time® results! The NXP-HTD features automatic tank fill, door-actuated start, a built-in booster heater with Sani-Sure™ final rinse system, digital temperature display, delime cycle, interchangeable upper and lower wash/rinse arms, vent fan control, and a generous 17.25″ vertical chamber clearance. Designed to clean 63 racks of dishes per hour, the Jackson NXP-HTD warewashing system has a 57-second single automatic cycle. Its pull-down door starts the washing cycle and a digital temperature display located on top of the unit provides ongoing information to the operator, ensuring functional operation. Stainless steel nozzles deeply clean the dishware; the upper and lower wash and rise arms are interchangeable to maintain effective cleaning functions. After general cleaning, the 20-inch-wide by 20-inch-deep racks are finally washed with a Sani-Sure™ final rinse system. The Jackson NXP-HTD commercial warewashing system's 17.25" vertical chamber clearance helps prevent dish jamming, reducing breakage. A large scrap basket located on the bottom of the unit collects leftover food, particles, and can be removed for emptying and cleaning. The tank automatically fills; its rise booster heater is built in and operates at 70 degrees Fahrenheit. When the unit becomes idle, its vent fan will shut off to conserve energy. If temperatures become too hot during operation, the unit alerts the operator and turns off; it also notifies the operator when water levels are too low. Overall, the unit is 30 5⁄8" wide, 29" deep, and 64" high. Features: Electric tank heat Cleans 63 (58)* racks per hour using only 0.89 gallons of water per rack Built-in booster heater with Sani-Sure™ final rinse system ensures proper sanitization is achieved every cycle Single 57-second automatic cycle Automatic tank fill Door-actuated start Digital temperature display Delime cycle 17.25″ vertical chamber clearance Interchangeable upper and lower wash/rinse arms 1 hp stainless steel wash pump motor Vent fan control shuts the vent fan off when machine is idle, saving energy Top mounted controls for ease of operation Large scrap basket Single point connections for all utilities Field convertible from straight-through to corner and vice versa (kit required) Field phase conversion capable (kit required) Low watt density electric wash tank heater Hi-limit thermostat and low water protection Detergent/rinse additive signal connection fuse box Adjustable bullet feet Uses standard 20″ x 20″ (508 mm x 508 mm) racks Read more Specifications Specifications Model NXP-HTD Width 30.625 Inches Depth 29 Inches Height 64 Inches Voltage 240 V Hertz 60 Hz Phase 3 pH Racks Per Hour 58-63 Wash Cycle Time 57 Seconds Vertical Chamber Clearance 17.25 Inches Compatible Rack 20" x 20" rack Wash Pump Motor 1 HP Wash Tank Capacity 8 gal (30 L) Booster Tank Capacity 1.66 gal (6.29 L) Product Type Single Rack Dishwasher ETL Certified Determined through independent testing and periodic follow-up inspections by NRTL. This item meets North American product safety standards and published industry standards. Energy Star Partner This item meets strict energy performance standards set by EPA. Highly energy efficient making it less expensive to operate. Files Spec Sheet

Control panel with LCD display EWC System, electronic control with 4 individual programmable cycles Energy saving start cycle system (washing cycle started only with push pressure on the closing handle) Drain pump optional (Ecology Care system for partial refilling of clean water every washing cycle) Vacuum breaker valve Integral stainless steel tank filter + New filtering group for suction and drain Racks supplied: 2 dish baskets, 1 glass basket, and 2 cutlery trays Adjustable 3L/hour detergent dispenser 60 racks/hour or approximately 35 racks/hour in accordance to NSF standards Description 60 years of experience with evolving technology has produced the HANDY H110E-A. Thesis offers a professional wash system, designed and created to provide excellent cleaning, hygiene and brightness. The HANDY hood-type dishwasher is an ideal solution for establishments that have to wash different types of dishes, glasses and hotel/gastronorm pans. Simple to use for heavy duty applications with low maintenance. We guarantee impeccable wash quality, which can meet even the needs of the most sophisticated customers. This model is ETL and ETL Sanitation certified as it meets the requirements of the NSF/ANSI 3 rule. The washing cycles have been specifically designed to make the dishwasher compliant with the NSF hygienic safety standards, recognized by the American National Standards Institute (ANSI). The HANDY line stands out for its wide range of models suitable for any situation. The simple electronic board control system makes it possible to set and control the rinsing and draining times and temperatures and the relevant Thermostops, crucial for ensuring excellent final results. With the control panel you can choose one of its 4 washing cycles and one automatic drain cycle (with installed drain pump), easily view on the display the tank and boiler temperature, the messages of the Self-diagnosis system and the Scheduled Maintenance warning. The smart Start button changes colour to always keep you up-to-date on the dishwasher status with the greatest ease. The electronic control allows you to manage various parameters to give you an absolute customisation level and the continuous self-diagnosis allows you to minimise machine downtime, suggesting some operations that need to be verified. The self-cleaning cycle at the end of the day cleans the wash tank and empties the hot water from the boiler, preventing limestone from building up inside. The standard double peristaltic electric rinse-aid and detergent dispenser ensures the best result from each wash cycle with great savings thanks to the precise dosage managed by the electronic card; whereas, the moulded washing and rinsing arms ensure great reliability and durability. The Thermo-stop function checks that washing and rinsing begin only when the desired temperature is reached. The bodywork is made entirely of AISI 304 steel and has been designed with all of the components in the front for easy technical assistance. Sturdy and reliable dishwashers to best deal with every moment of your day. Read more Specifications Specifications Model H110E-A Width 24.5 inches Depth 30.25 inches Height 74.75 inches Weight 265 Lbs Tank Heating Element 4.5kW, capacity: 9.8gal (37L) Booster Heating Element 6.0kW, capacity: 1.9gal (7.3L) Washing Pump 1.5HP Total Power Input 6,52kW / 16A Standard Input Voltage 6.52kW, 208/220V 60Hz, 16A 3PH, 30A 1PH Hot Water Requirements ½ GPC (2.6LPC) 125⁰F (55⁰C), will operate with cold water at reduced capacity Water line requirements ¾” (or ½” with ¾” NPT terminal) hose supplied Water pressure requirements 30–45psi (2–3bar) Drain Line 1" (25mm) connection hose supplied Door clearance 15.6" (395mm) height Product Type Single Rack Dishwasher ETL Certified Determined through independent testing and periodic follow-up inspections by NRTL. This item meets North American product safety standards and published industry standards. ETL Sanitation List This item demonstrates compliance to North American sanitation standards NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. Files Spec Sheet

Uses 2.8 gallons of water per cycle Timed wash cycles for 2-4-6 minutes 34" door opening 208-240V / 60 Hz / 3 Phase Description Quickly and efficiently clean full racks pots, pans, and utensils with the Hobart PW20eR High Temperature Dishwasher. This convenient dishwasher has a front loading, split-door configuration to accommodate unique needs. Hobart’s patented Sense-A-Temp booster heater (sold separately) can also be added to efficiently raise final rinse temperatures up 70°F when sanitizing with hot water. The Hobart PW20eR uses 2.8 gallons of water per cycle and has the ability to clean between 7 to 13 racks per hour. Choose between three different wash cycles of 2, 4, or 6 minutes for the most effective clean. This front loaded dishwasher is constructed out of stainless steel and is significantly durable for heavy use in any commercialized kitchen. The dishwasher has a large 34-inch door opening to accommodate a variety of large pots and pans. Heat energy is recovered from the condensation of vapors in the chamber at the end of each cycle. This pre-heats the water for the next rinse cycle from 55°F up to 140°F. Read more Specifications Specifications Model PW20eR Width 58 inches Depth 37 inches Height 89 inches Voltage 208-240V Hertz 60 Hz Phase 3 Phase Rated Amps 58.6/64 A Booster Heater Yes Racks Per Hour 7 - 13 per hour Water Usage 2.8 gal per rack Type Single Rack Dishwasher NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. Energy Star Partner This item meets strict energy performance standards set by EPA. Highly energy efficient making it less expensive to operate. Bare Wire This product comes bare wire and must be hardwired. There is no standard plug. Files

Uses 1.2 gallons of water per rack Cleans 8-20 racks per hour 120-360 seconds cycle time 33" door opening 208-240V / 60 Hz / 3 Phase Description Quickly and efficiently clean full racks pots, pans, and utensils with the Hobart PW10eR High Temperature Dishwasher. This convenient dishwasher has a front loading, split-door configuration to accommodate unique needs. Hobart’s patented Sense-A-Temp booster heater (sold separately) can also be added to efficiently raise final rinse temperatures up 70°F when sanitizing with hot water. The Hobart PW10eR uses 1.2 gallons of water per cycle and has the ability to clean between 7 to 13 racks per hour. Choose between three different wash cycles of 2, 4, or 6 minutes for the most effective clean. This front loaded dishwasher is constructed out of stainless steel and is significantly durable for heavy use in any commercialized kitchen. The dishwasher has a large 33-inch door opening to accommodate a variety of large pots and pans. Heat energy is recovered from the condensation of vapors in the chamber at the end of each cycle. This pre-heats the water for the next rinse cycle from 55°F up to 140°F. Read more Specifications Specifications Model PW10eR Width 32 inches Depth 37 inches Height 88 inches Voltage 208-240V Hertz 60 Hz Phase 3 Phase Rated Amps 47.6/53 A Booster Heater Yes Racks Per Hour 7 - 13 per hour Wash Cycle Time 120 - 360 seconds Water Usage 1.2 gal per rack Type Single Rack Dishwasher NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. Energy Star Partner This item meets strict energy performance standards set by EPA. Highly energy efficient making it less expensive to operate. Bare Wire This product comes bare wire and must be hardwired. There is no standard plug. Files

Uses 2.35 gallons of water per cycle Timed wash cycles for 2-4-6 minutes 34" door opening 208-240V / 60 Hz / 3 Phase Description Quickly and efficiently clean full racks pots, pans, and utensils with the Hobart PW20-1 High Temperature Dishwasher. This convenient dishwasher has a front loading, split-door configuration to accommodate unique needs. Hobart’s patented Sense-A-Temp booster heater (sold separately) can also be added to efficiently raise final rinse temperatures up 70°F when sanitizing with hot water. The Hobart PW20-1 uses 2.35 gallons of water per cycle and has the ability to clean between 8 to 20 racks per hour. Choose between three different wash cycles of 2, 4, or 6 minutes for the most effective clean. This front loaded dishwasher is constructed out of stainless steel and is significantly durable for heavy use in any commercialized kitchen. The dishwasher has a large 34-inch door opening to accommodate a variety of large pots and pans. Heat energy is recovered from the condensation of vapors in the chamber at the end of each cycle. This pre-heats the water for the next rinse cycle from 55°F up to 140°F. Read more Specifications Specifications Model PW20-1 Width 58 inches Depth 37 inches Height 78 inches Voltage 208-240V Hertz 60 Hz Phase 3 Phase Rated Amps 58.6/64.0 A Booster Heater Yes Racks Per Hour 8 - 20 per hour Water Usage 2.35 gal per rack Type Single Rack Dishwasher NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. Energy Star Partner This item meets strict energy performance standards set by EPA. Highly energy efficient making it less expensive to operate. Bare Wire This product comes bare wire and must be hardwired. There is no standard plug. Files

Uses 1.2 gallons of water per rack Cleans 8-20 racks per hour 120-360 seconds cycle time 33" door opening 208-240V / 60 Hz / 3 Phase Description Quickly and efficiently clean full racks pots, pans, and utensils with the Hobart PW10-1 High Temperature Dishwasher. This convenient dishwasher has a front loading, split-door configuration to accommodate unique needs. Hobart’s patented Sense-A-Temp booster heater (sold separately) can also be added to efficiently raise final rinse temperatures up 70°F when sanitizing with hot water. The Hobart PW10-1 uses 1.2 gallons of water per cycle and has the ability to clean between 8 to 20 racks per hour. Choose between three different wash cycles of 2, 4, or 6 minutes for the most effective clean. This front loaded dishwasher is constructed out of stainless steel and is significantly durable for heavy use in any commercialized kitchen. The dishwasher has a large 33-inch door opening to accommodate a variety of large pots and pans. Heat energy is recovered from the condensation of vapors in the chamber at the end of each cycle. This pre-heats the water for the next rinse cycle from 55°F up to 140°F. Read more Specifications Specifications Model PW10-1 Width 32 inches Depth 37 inches Height 78 inches Voltage 208-240V Hertz 60 Hz Phase 3 Phase Rated Amps 47.6/53.0 A Booster Heater Yes Racks Per Hour 8 - 20 per hour Wash Cycle Time 120 - 360 seconds Water Usage 1.2 gal per rack Type Single Rack Dishwasher NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. Energy Star Partner This item meets strict energy performance standards set by EPA. Highly energy efficient making it less expensive to operate. Bare Wire This product comes bare wire and must be hardwired. There is no standard plug. Files

Heavy-duty stainless steel construction Front-loading, split door design External rinse hose and spray gun Self-contained water heater Moisture resistant control gauges Recirculating wash water Adjustable wash and rinse cycles Easy to remove filter screens Digital control and information system Fresh water sanitizing rinse Versatile racking system Ample 20 pan capacity 60 cycle with output of 120 gallons per minute Description Get spotless pots and pans every time with this Champion SD-20 split door pot and pan washer! This washer is made of heavy-duty stainless steel that resists corrosion and extends the life of the dishwasher. It is compact and easy to install and is perfect for washing and sanitizing your pots and pans.Its split door design allows for simple and convenient loading and unloading. The split door design allows for front-loading, and the bottom half of the door creates an extra drain table. Plus, the external rinse hose and spray gun makes it easy to clear food debris off of dishes inside the unit prior to washing This washer features an ample 20 pan capacity, so you can get many of your items washed at once. Plus, it washes with 120 gallons per minute economical workflow. The quick wash cycle makes it perfect for use in restaurants, hotels, cafeterias, or hospitals. It also features a 12 kW electric booster heater to ensure that it reaches the proper temperature quickly and your items are cleaned as quickly as they need to be. In addition, the 15 hp pump motor ensures proper water flow during the rinse cycle. This machine requires a 208V, 3 phase electrical connection for operation. Read more Specifications Specifications Model SD-20 Width 50 Inches Depth 36 Inches Height 71 Inches Voltage 208 V Amps 88 Amps Phase 3 ph Application Pots and Pans Plug Type Hardwire Dishwasher Style Front Load Water Connection 3/4" NPT Wash Tank Capacity 36 Gallons UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. UL Certified Certified by Underwriters Laboratories, this product has been stringently tested and meets safety standards. Files

60 racks / 240 covers per hour. Economical to operate. Uses only .82 gallons of water per cycle. Automatic soil purging system. Filters wash water and traps plate debris into an external tray. Tray can be easily removed for dumping contents. All stainless steel construction offers durable performance and years of trouble free operation. Built-in chemical resistant industrial 7kW (240V) heater is proven to be more durable than commercial style heaters. Unique spray arm system features upper and lower stainless steel wash arms with reinforced end caps. Specially designed pull-pins allow wash arms to be easily removed for cleaning. Top mounted control box is water tight and includes a rack counter, extended wash/delimer switch and easy to read temperature gauges. Auto start/stop makes operation safe and easy. Field convertible for a wide range of applications. Safety Temp feature assures 180°F sanitizing rinse every cycle. Single point electrical connection. Automatic tank fill. Interchangeable upper and lower arms Specifications Model CMA-180 Width 25.5 Inches Depth 25 Inches Height 60 Inches Voltage 208 / 240 / 480 Volts Phase 1 / 3 Phases Hertz 60 Hz Phase 1 / 3 Phases Motor Horsepower 2 PH Water Consumption 47 Gal/Hour Racks Per Hour 60 Racks/Hour Wash Tank Capacity 8 Gal Wash Temperature 155 - 160°F / 68 - 71°C Total Cycles 58 Time Cycle 2 Minutes Booster Heater 12 kiloWatts Control Type Digital Control Product Type Single Rack Dishwasher NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. Energy Star Partner This item meets strict energy performance standards set by EPA. Highly energy efficient making it less expensive to operate.

Sani-Sure ™ feature assures proper rinse water temperature Multi-cycle timer (Extra Heavy, Heavy, Medium, Normal) Specially designed stainless steel nozzles provide superior cleaning action 17-1/4” (438 mm) door opening accepts 18” (457 mm) trays Interchangeable wash/rinse arms screw out for simple cleanup Auto-fill/auto-start Door switch Delime/manual wash switch Vent fan control - shuts vent fan off when machine is idle Low watt density electric wash tank heater Hi-limit thermostat and low water protection Top mounted controls for ease of operation Adjustable bullet feet Uses standard 20” X 20” (508 mm X 508 mm) racks Front dress panel Detergent/rinse additive signal connection fuse box Self-draining stainless steel pump Built-in 70° F (38.9° C) rise booster heater is standard Large scrap basket Specifications Model TEMPSTAR Width 25.25 Inches Depth 25.25 Inches Height 64.3 Inches Voltage 208 / 230 / 460 Volts Phase 1 / 3 Phases Hertz 60 Hz Amps 6 Amps Total Automatic Cycle 57 Seconds Motor Horsepower 1 PH Racks Per Hour 39 Racks Per Hour Wash Tank Capacity 8 Gal Product Type Single Rack Dishwasher Energy Star Partner This item meets strict energy performance standards set by EPA. Highly energy efficient making it less expensive to operate. ETL Certified Determined through independent testing and periodic follow-up inspections by NRTL. This item meets North American product safety standards and published industry standards. ETL Sanitation List This item demonstrates compliance to North American sanitation standards

20-3/4” wide X 27“ high (527mm X 686mm) opening accommodates 18” X 26“ (457mm X 660mm) sheet pans and 60-quart mixing bowls Sani-Sure™ feature assures proper rinse water temperature Multi-cycle timer (Extra Heavy, Heavy, Medium, Normal) Auto-Fill / auto-start Door switch Delime/manual wash switch Low watt density electric wash tank heater Hi-limit thermostat and low water protection Vent fan control shuts fan off when machine is idle Adjustable bullet feet Uses standard 20” X 20” (508 mm X 508 mm) racks Front dress panel Detergent/rinse additive signal connection fuse box Built-in 70° F (38.9° C) rise booster heater is standard Lower counter-rotating wash arms and upper wash arm provide optimum spray coverage and superior cleaning action Self-draining stainless steel pump Split-door design accommodates installations with low ceiling heights Large scrap basket Description The Jackson Tempstar HH-E Ventless High Temperature Dishwasher is a powerhouse of efficiency and innovation, designed for the demands of commercial kitchens. It is capable of cleaning up to 55 racks per hour. This high-temperature dishwasher ensures that your dishes, glassware, and utensils emerge spotless and sanitized. Boasts a durable stainless steel construction, ensuring longevity and resistance to the wear and tear of daily use. Its high-temperature sanitizing capabilities meet the strictest health and safety standards, providing peace of mind that your kitchen operations are both efficient and hygienic. Designed with user-friendly controls, the dishwasher simplifies operation and maximizes productivity. The Jackson Tempstar HH-E Ventless High Temperature Dishwasher is not just a piece of equipment; it's an essential partner in your kitchen's workflow, delivering reliability, efficiency, and quality with every cycle. Read more Specifications Specifications Model TEMPSTAR-HH Width 25.25 Inches Depth 25.25 Inches Height 76.75 Inches Voltage 208 / 230 / 460 Volts Phase 1 / 3 Phases Hertz 60 Hz Amps 12 Amps Total Automatic Cycle 60 Seconds Motor Horsepower 2 PH Racks Per Hour 55 Racks Per Hour Wash Tank Capacity 8 Gal Product Type Single Rack Dishwasher Energy Star Partner This item meets strict energy performance standards set by EPA. Highly energy efficient making it less expensive to operate. ETL Certified Determined through independent testing and periodic follow-up inspections by NRTL. This item meets North American product safety standards and published industry standards. ETL Sanitation List This item demonstrates compliance to North American sanitation standards Files Spec Sheet

25 racks per hour Rinse 1.16 gpm / 2.8 gallons per rack 25" x 27" opening Automatic fill maintains proper tank levels Adjustable cycle times 3 HP wash motor recirculating 230 gpm Stainless steel front enclosure panel protects motors and controls from moisture Stainless steel construction Door safety switches prevents operation if door is open Stainless steel drain valves and poppets, foot activated Kit 55, included prv, shock arrestor and pressure gauge in final rinse line Bell-type stainless steel skimmer acts as overflow and removes fats and oils from the wash tank Specifications Specifications Model U-31/A2 Width 34 Inches Depth 35 Inches Height 69 Inches Voltage 208 Phase 3 PH Racks Per Hour 25 Racks Per Hour Wash Pump Motors 6PH Wash Tank Heaters 20 kiloWatts Product Type Single Rack Dishwasher NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. Files Spec Sheet

80 racks / 320 covers per hour. Model SB All stainless steel construction assures long life and years of trouble free operation. Unique spray arm system features upper and lower stainless steel wash arms with reinforced end caps. Specially designed pull-pins allow wash arms to be easily removed for cleaning. Pump purging system improves results by eliminating soil and chemical carryover during rinse cycle. Top mounted controls include built-in chemical pumps and deliming system that assures proper chemical usage. Auto start/stop makes operation safe and easy. Large 27" high door opening accommodates larger items and utensils. Integrated scrap tray prevents food soil from entering drain system. Stainless steel impeller offers extended life and service. Two dish-racks included. Built-in strainer in water inlet to prevent water valve from clogging Specifications Model S-B Width 44.25 Inches Depth 25.75 Inches Height 67 Inches Voltage 115 Amps 30 Amps Tank Capacity 3.0 Gal Racks / Covers Per Hour 80 Racks / 320 Covers Per Hour Total Cycle Time 90 Water Consumption 118.4 GPH/Hour Water Inlet 0.75 Inches Wash Temperature (Recommended) 140°F / 60°C Wash Temperature (Required) 120°F / 49°C Product Type Single Rack Dishwasher NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards.

Built-in high efficiency Energy Saving Device (ESD) transfers the heat captured inside the machine to the incoming cold water before entering the booster, thus saving energy; no ventilation hood is needed for the machine (unless local regulations or restrictions apply). ZERO LIME Device ensures total scale removal from the hydraulic circuits and the washing chamber allowing for lower energy consumption thanks to the high-efficiency of the heating elements. CLEAR BLUE advanced filtering system provides cleaner wash water and higher active detergent thus ensuring better washing performances and lower running costs. Requires only 1/2 gal (2 L) of water per rack thus ensuring low energy, water, detergent and rinse aid consumption. Energy Star 2.0 certified product. Built-in atmospheric booster sized to raise incoming cold water to a minimum of 180°F (82°C) for sanitizing rinse. No external booster is required. Constant temperature above 180°F (82°C) throughout the rinsing cycle. ETL C & US and ETL-Sanitation approved (ANSI/NSF 3 sanitation standard). Green light of "WASH SAFE CONTROL" confirms that items have been rinsed properly. Unique temperature interlock guarantees required temperatures in both the wash and final rinse. Maximum capacity per hour of 63 racks or 1.134 dishes. 57/84/150 seconds cycles (ETL-S mode). Incorporated Soft Start feature to offer additional protection to more delicate items. Slanted wash arms and sloped ceiling to avoid detergent-filled wash water dropping on clean dishes after the rinsing phase, thus guaranteeing ideal washing results. Cycle may be interrupted at any time by lifting the hood. Automatic self-cleaning cycle and self-draining wash pump and booster to avoid bacteria proliferation. State-of-the-art electronic controls with built-in programming, self-diagnostics for serviceability and automatic interior rinse-down cycle. Built-in rinse aid and detergent dispenser with automatic initial and continuous cycle loading for perfect result while minimizing service and maintenance needs. Three phase electrical connection. Deep drawn pressed 6.4 gal (24 L) tank in front position with no welded points offer a guaranteed water tight solution and eliminates dirt traps. Vertical self-draining wash pump ensures no bacteria proliferation and bad smells during non-operation hours. Booster highly resistant to chlorinated water thanks to robotized TIG welding technology. Specifications Model 504280 Width 29.6 Inches Depth 29.75 Inches Height 89.5 Inches Voltage 208 Volts Hertz 60 Hertz Phase 3 Phases Tank Capacity 6.34 Gal Racks Per Hour 63 Racks/Hour Number of Cycles 3 Cycles Tank Heating Elements 3 kiloWatts Wash Temperature 160°F / 71°C Product Type Single Rack Dishwasher NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. ETL Certified Determined through independent testing and periodic follow-up inspections by NRTL. This item meets North American product safety standards and published industry standards. ETL Sanitation List This item demonstrates compliance to North American sanitation standards Energy Star Partner This item meets strict energy performance standards set by EPA. Highly energy efficient making it less expensive to operate.

Built-in booster for both 40° and 70° rise Rinse Sentry - ensures 180°F final rinse Auto start - starts unit when hood is closed Single point connection High efficiency 1 Hp pump 40 racks per hour Self draining pump Automatic tank fill Detergent/chemical connections Interchangeable upper and lower arm Automatic drain valve - drains tank when power is off Vent fan control Bottom mounted digital controls PRV (pressure regulating valve) Sloped hood keeps hot vapors away from operator Standard and heavy duty wash cycles Specifications Model DH5000T-VHR Width 34.5 Inches Depth 31.87 Inches Height 71 Inches Voltage 208 - 240 / 460 - 480 Volts Hertz 60 Hertz Phase 1 / 3 Phases Capacity 9.5 Gal Racks Per Hour 40 Racks/Hour Motor Horsepower 2 HP Electric Heating Unit 5.2 kiloWatts Wash Temperature 150°F / 66°C Product Type Single Rack Dishwasher NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards.

NEW Exclusive built-in booster 70° rise Field convertible from straight to corner operation Dual NSF listed as both a dishwasher and pot-washer Rinse Sentry - ensures 180°F final rinse Auto Start - starts unit when hood is closed Single point electrical connection High efficiency 2 HP pump Up to 60 racks per hour Self draining pump Automatic tank fill Detergent/chemical connections Interchangeable upper and lower spray arms Automatic drain valve - drains wash tank when power is off Vent fan control (with 120 volt interwiring by others) Bottom mounted digital controls PRV (mounted Pressure Reducing Valve) Sloped hood keeps hot vapors away from operator Standard and Heavy Duty wash cycles 4 selectable cycles 27" [686mm] extended clearance Specifications Model DH5000T Width 34.5 Inches Depth 31.87 Inches Height 72 Inches Voltage 208 - 240 / 460 - 480 Volts Hertz 60 Hertz Phase 1 / 3 Phases Capacity 9.5 Gal Racks Per Hour 60 Racks/Hour Motor Horsepower 2 HP Electric Heating Unit 5.2 kiloWatts Product Type Single Rack Dishwasher UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. Energy Star Partner This item meets strict energy performance standards set by EPA. Highly energy efficient making it less expensive to operate.

Hot water sanitizing Uses 0.85 gallons of water per rack Cleans 58 racks in an hour 60-240 seconds per cycle (depending on setting) 17" door opening 8.5 kW built-in booster heater 208-240V / 60 Hz / 1 Phase Description Quickly and efficiently clean and sterilize racks of dishes, glassware, pots and pans, and utensils with the Hobart Stero SD3-6 Door-Type Dishwasher with Built-In Booster Heater. This powerful and energy efficient door-type dishwasher uses only 0.85 gallons of water per rack and has the ability to clean 58 racks per hour. Three timed wash cycles of 1, 2, or 4 minutes help give you the most effective clean. An 8.5 kW built-in booster heater ensures minimum temperatures of 180 ° F for the final rinse cycle. This door-type warewasher is constructed out of stainless steel and features interchangeable upper and lower wash and rinse arms. It’s equipped with clear digital controls that let you select between cycle lengths as well as deliver error notifications in case of a problem. The dishwasher has a large 17-inch door opening to accommodate a variety of dishes and cookware including large pots and pans. Read more Specifications Specifications Model SD3-6 Width 28.75 inches Depth 34 inches Height 66.5 inches Voltage 208-240V Hertz 60 Hz Phase 1 Phase Rated Amps 78.4 Amps (With Electric Heat & Booster) Heating Unit 5 kW Booster Heater 8.5 kW Racks per Hour 58 Wash Cycle Time 60-240 seconds Water Usage 0.85 gal Water Temperature 180°F Door Opening 16.87 inches Dishwasher Type Door-Type Type Single Rack Dishwasher NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. Energy Star Partner This item meets strict energy performance standards set by EPA. Highly energy efficient making it less expensive to operate. Bare Wire This product comes bare wire and must be hardwired. There is no standard plug. Files Spec Sheet

Hot water sanitizing Uses 0.85 gallons of water per rack Cleans 58-65 racks in an hour 60-240 seconds per cycle (depending on setting) 17" door opening 5 kW electric heating unit 208-240V / 60 Hz / 3 Phase Description Quickly and efficiently clean and sterilize racks of dishes, glassware, pots and pans, and utensils with the Hobart Stero SD3-1 Door-Type Dishwasher with Electric Tank Heat. This powerful and energy efficient door-type dishwasher can be configured into a hot water or chemical sanitizing unit depending on your unique needs. It’s low on energy and water consumption, which means you’ll be spending less on utility bills. The Hobart Stero SD3-1 uses only 0.85 gallons of water per rack and has the ability to clean 58 racks per hour when using hot water to sanitize or 65 racks per hour when using chemicals to sanitize. Three timed wash cycles of 1, 2, or 4 minutes help give you the most effective clean. A 5 kW electric heating unit ensures minimum temperatures of 180F for hot water sanitizing or 140F for chemical sanitizing. This door-type warewasher is constructed out of stainless steel and features interchangeable upper and lower wash and rinse arms. It’s equipped with clear digital controls that let you select between cycle lengths as well as deliver error notifications in case of a problem. The dishwasher has a large 17-inch door opening to accommodate a variety of dishes and cookware including large pots and pans. Read more Specifications Specifications Model SD3-1 Width 28.75 inches Depth 34 inches Height 66.5 inches Voltage 208-240V Hertz 60 Hz Phase 3 Phase Rated Amps 24.9 Amps Heating Unit 5 kW Booster Heater No Racks per Hour 58 Wash Cycle Time 60-240 seconds Water Usage 0.85 gal Water Temperature Hot water: 180°F Chemical: 140°F Door Opening 16.87 inches Dishwasher Type Door-Type Type Single Rack Dishwasher NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. Energy Star Partner This item meets strict energy performance standards set by EPA. Highly energy efficient making it less expensive to operate. Bare Wire This product comes bare wire and must be hardwired. There is no standard plug. Files Spec Sheet

53 racks per hour 0.83 gallons used per rack High efficiency 1 HP pump Digital display and dial controls Built-in both 40° and 70° rise booster Wash temperature 150°F Rinse temperature 180°F Description The Champion DH5000 dishwasher has all the features you need to properly wash and sanitize your glassware and dinnerware. With the high efficiency 1 HP pump the DH5000 is able to wash a up to 53 racks per hour using 0.83 gals per rack. With a built-in 70°F rise booster configured and a final rinse of 180°F, ensuring your dishes are sanitized properly. This dishwasher automatically starts once the hood is close and with the new Dry Assist feature, the drying process is faster than regular dishwashers, helping you save time and an added extra convenience. The bottom mounted digital controls give you full control of the wash and final rinse temperatures, wash flow pressure, and the option of a standard cycle (60 seconds) or extended cycle (90 seconds). The rinse and wash dial controls feature a digital temperature display and below is an included is a pressure gauge indicating the final rinse water flow pressure. Overall dimensions Height: 60 1/8" (77 1/4" Height with Hood up) Depth: 34 1/8" Width: 29 1/2" Read more Specifications Specifications Model DH5000 Width 29.05 inches Depth 34.12 inches Height 77.25 inches Racks Per Hour 53 Water Usage Per Rack 0.83 gallons Motor Horsepower 1HP Water Consumption Per Hour (max use.) 45.7 gallons Water Tank Capacity 9.5 gallons Dishwasher Type Hood-type Wash Temperature 150°F Rinse Temperature 180°F Wattage 5.2 kW - 10 kW Voltage 208V Phase 1 NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. Energy Star Partner This item meets strict energy performance standards set by EPA. Highly energy efficient making it less expensive to operate. Files Spec Sheet Manual

37 racks per hour 0.83 gallons used per rack High efficiency 1 HP pump Ventless System Digital display and dial controls Built-in 70°rise booster Wash temperature 150°F Rinse temperature 180°F Description The Champion DH5000-VHR ventless heat recovery high temperature hood-type dishwasher has all the features you need to properly wash and sanitize your glassware and dinnerware. With the high efficiency 1 HP pump the DH5000-VHR is able to wash a up to 37 racks per hour using 0.83 gals per rack. With a built-in 70°F rise booster configured and a final rinse of 180°F, ensuring your dishes are sanitized properly. This dishwasher automatically starts once the hood is close and with the new Dry Assist feature, the drying process is faster than regular dishwashers, helping you save time and an added extra convenience. The bottom mounted digital controls give you full control of the wash and final rinse temperatures, wash flow pressure, and the option of a standard cycle (60 seconds) or extended cycle (90 seconds). The rinse and wash dial controls feature a digital temperature display and below is an included is a pressure gauge indicating the final rinse water flow pressure. The ventless model is able to reuse its heat while removing condensation by removing heat and water vapor at the end of the cycle while transferring the normally exhausted heat to the 70°F riser. Overall dimensions Height: 81 7/8" (Add 8 1/8" for minimum clearance) Depth: 34 1/8" Width: 26 1/8" Read more Specifications Specifications Model DH5000-VHR Width 26.13 inches Depth 34.13 inches Height 81.88 inches Racks Per Hour 37 Water Usage Per Rack 0.83 gallons Motor Horsepower 1HP Water Consumption Per Hour (max use.) 30.7 gallons Water Tank Capacity 9.5 gallons Dishwasher Type Hood-type Wash Temperature 150°F Rinse Temperature 180°F Wattage 5.2 kW - 10 kW Voltage 208V Phase 1 NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. Energy Star Partner This item meets strict energy performance standards set by EPA. Highly energy efficient making it less expensive to operate. Files Spec Sheet Manual

ENERGY STAR® Qualified Uses only .93 US gallons (.77 imp/3.5L) of water per cycle Convertible from straight to corner operation in field Quick 90 second cycle time 40 racks / hour Economical to operate All stainless steel construction Unique spray arm system features upper and lower stainless steel wash arms with reinforced end caps Top mounted controls include built-in chemical pumps and deliming system for dealing with scale Auto start/stop New integrated scrap tray prevents food soil from entering drain system Airgap fill system 17” tall door opening 115 volt unit – 20 amp breaker required Spec Sheet

Specified unit will be Moyer Diebel model MD2000HT high temperature door-type dishwashing machine. Features 1 Hp pump motor, top mounted splash proof controls, Rinse Sentry, auto start and interchangeable upper and lower spray arms. Convertible from straight to corner operation in field Built-in booster configured for 40° and 70° rise Built-in diagnostics • 208/240 volt; 1/3 phase (field convertible) Straight through or corner operation Capacity 55 racks per hour/60-second cycle Uses .90 gallons of water – wash is replenished by final rinse for less water and detergent usage Interchangeable stainless steel upper/lower wash rinse arms Door safety switch Door activated start Rinse Sentry Detergent chemical connection Vent fan control Automatic drain valve Complete with two 20" x 20" racks, one peg and one flat Spec Sheet