Holding Cabinet / Proofing Cabinet

Heater/Proofer Cabinet Non-insulated Even heat and circulation from air baffle and circulating air blower Comes with casters (2 brakes in front) Dual proof/heat control Humidity from 30%-80% Max. temperature 180°F/82°C Clear door with aluminum framing Accessible control panel with LED temperature display 120V / 60 Hz / 1 Phase Equipped with a drip pan and internal water pan Description Efficiently prepare dough for baking or keep freshly cooked food warm prior to serving with Nella’s Non-Insulated Heated Proofer and Cabinet combination. This proofing cabinet provides the ideal environment for readying bread dough before baking. It’s perfect for bakeries that produce a large quantity of bread products such as loaves, buns, rolls, and baguettes. With the capacity to hold up to (35) 18” x 26” food pans, you’ll have plenty of storage to get you through even the busiest of days. Nella’s proofer circulates heat evenly throughout the cabinet from an air baffle and circulating air blower. It features a digital temperature display as well as a switch to toggle between heating and proofing modes. With two easy-to-use dials, you’re able to adjust the temperature up to 180°F (82°C) as well as control the humidity within the cabinet between 30% and 95%. The unit is made from a durable and easy-to-clean material and features an aluminum framed clear door so you can keep a close eye on your dough and other products within the cabinet. In addition, it comes equipped with four swivel casters and brakes on the front pair. Read more Specifications Specifications Cabinet Model 31834 Control Box Model 39528 Width 21 inches Depth 30.75 inches Height 68 inches Power Type Electric Voltage 120V Hertz 60 Hz Phase 1 Phase Amps 15 Amps Max Temperature 180°F / 82°C Humidity Range 30% - 95% Insulated No Pan Capacity (35) 18" x 26" Installation Type Floor Type Heater Proofer/Holding Cabinet 5-15P This product comes with a NEMA 5-15P plug. Files Spec Sheet

Heavy Duty, aluminum construction designed for durability Easy to Clean Forced air design provide even heat distribution 5” polyurethane plate casters for easy maneuverability and stability. Front casters are provided with brakes Easy dual proof/heat control “Proof/humidity” mode: Up to 95% humidity at 110°F (43°C) “Heat” mode: Maximum Temperatures up to 180°F (82°C) Corner bumpers provide protection to unit, associates & fixtures Clear door, extruded, anodized aluminum frame will not dull. A tight fit gasket is installed on the inside door frame Description Efficiently prepare dough for baking or keep freshly cooked food warm prior to serving with Winholt’s Non-Insulated Heated Proofer and Cabinet combination. The unit is made from a durable and easy-to-clean material and features an aluminum framed clear door so you can keep a close eye on your dough and other products within the cabinet. In addition, it comes equipped with four swivel casters and brakes on the front pair. Read more Specifications Specifications Model NHPL-1836-ECOC Width 30.75 Inches Depth 21 Inches Height 66.50 Inches Power Type Electric Voltage 120V Hertz 60 Hz Phase 1 Phase Amperage 14 Amps Max Temperature 180°F / 82°C Humidity Range Up to 95% Insulated No Pan Capacity (35) 18" x 26" Installation Type Floor Type Heater Proofer/Holding Cabinet 5-15P This product comes with a NEMA 5-15P plug. Files

This Metro C5E9-CFC-U Full-Size Heated Holding and Proofing Mobile Non-Insulated Cabinet features patented insulation technology retains heat that saves energy and provides a cool-to-touch exterior. Its durable polymer construction is dent, impact, and stain resistant. Molded-in hand holds create vertical handles for mobile applications. Features : Control : All feature an easy-to-read digital thermometer, recessed control dials, a master on/off switch, and power indicator lights. All are removable without tools for easy cleaning, and allow for future upgrades without replacing entire cabinet body. Performance : All modules provide fast heat-up and recovery through a thermostatically controlled, forced convection system. Doors : Solid insulated aluminum or clear poly-carbonate doors are available. Full Height cabinets can be configured with full length or dutch-style doors. Clear doors provide visibility of the contents of the cabinet without the heat loss associated with opening the door. Capacity : Universal Wire - 18 18" x 26" Pans Reliability : Reliability and durability are designed into every C5. High-quality components provide a long life of worry free use. Specifications Model C5E9-CFC-U Width 27.62 Inches Depth 31.5 Inches Height 71 Inches Voltage 120 Volts Wattage 2000 Watts Phase 1 Hertz 60 Hz Amps 16.7 Amps Door Type Clear Control Type Analog Display Type Digital Number of Pans 18 Product Type Holding Cabinet Made in America This product was made in United States of America. NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. 5-20P This product comes with a NEMA 5-20P plug.

Part of the C5 3-series Lip load slides on 1.5 in. centers Holds (35) 18 in. x 26 in. pans Red Insulation Armour keeps the exterior cool Insulated cabinet and door retain hot air Removable control module mounted at the bottom Thermostat reaches a maximum of 200 degrees F Digital thermometer for monitoring On/off switch with power-indicating light Mounted on 5-in. casters (2 brake) Durable aluminum construction Recommended clearance: 18 in. from cooking equipment, 1.5 in. sides, top, and rear; contact with 200-degree-F surfaces not advised Description Positioned on 5-inch casters, the Metro C539-HFS-L insulated heated cabinet can be wheeled throughout a banquet hall to serve food. It reaches a maximum temperature of 200 degrees Fahrenheit to ensure food stays warm enough to serve, and to verify accurate temperatures, this unit has a digital thermometer. It's turned on and off with the flip of a switch and an indicator light shows users when the unit is on. The Metro C539-HFS-L3 full-height mobile heated cabinet accommodates (35) 18-inch by 26-inch food pans on lip load slides. Its cabinet and door are insulated, and Red Insulation Armour™ keeps the exterior cool to the touch to prevent burns. For maintenance purposes, the bottom-mounted control panel is removable, and the unit is made of aluminum to provide durability. Read more Specifications Specifications Model C539-HFS-L3 Width 27.6 Inches Depth 31.5 Inches Height 71 Inches Voltage 120V Amperage 16 Amps Wattage 2000 Watts Hertz 60 Hz Plug Type NEMA 5-20P Temperature Range : 80°F (27°C) to 200°F (93°C) Material Aluminum/Polymer Cabinet Height Full Height Number of Doors 1 Module Type Heated Holding Front Door Style Full Length Solid Door Slide Type Lip Load Aluminum Pan Size 18" x 26" Pan Slides 35 NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. 5-20P This product comes with a NEMA 5-20P plug. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. Made in America This product was made in United States of America. Energy Star Partner This item meets strict energy performance standards set by EPA. Highly energy efficient making it less expensive to operate. Files SPEC SHEET BROCHURE PRODUCT INSTRUCTION

High density polyethylene insulation Holds up to 34 full-size pans Universal slide style Full-size cabinet Clear polycarbonate door 120V / 60 Hz / 1 Phase Description Keep your freshly cooked meals hot and ready-to-serve with the Metro C539-HFC-U Full-Size Insulated Heated Holding Cabinet. Perfect for restaurants, hotels, banquet halls, and other food service establishments that need a reliable method for keeping pre-cooked meals hot prior to serving. This high-performance cabinet delivers 2,000 watts of power giving you the confidence that your food is being held at safe temperatures at all times. It features an on/off power switch, indicator lights, a digital thermometer, and an easy-to-use temperature dial that let’s you adjust the heat within the cabinet, without adding moisture, between 80˚F and 200˚F. The heating module is completely removable to allow for easy cleaning and servicing. It can also be upgraded in the future with a different module without the need to replace the entire cabinet. The Metro C539-HFC-U is insulated with patented technology designed to retain heat and save energy while remaining cool to the touch on the outside. The exterior is constructed from a durable polymer that’s dent, impact, and stain resistant. It also features a clear aluminum and polycarbonate door that let’s you see and monitor your products inside at all times without sacrificing heat loss when opening up the cabinet. The full-size cabinet comes equipped with 18 universal slides for holding a variety of pans. The nickel-chrome electroplated wire slides are adjustable on 1.5” increments giving you the option to add more as needed. The slide style offers you the convenience of holding up to (18) 18” x 26” pans or up to 34 full-size 12” x 20” GN pans. It comes standard with 5” swivel casters with brakes on the front set allowing you to easily move the unit as needed for cleaning or maintenance. Read more Specifications Specifications Model C539-HFC-U Width 27.62 inches Depth 31.5 inches Height 71 inches Amps 16.7 Amps Voltage 120V Hertz 60 Hz Phase 1 Phase Wattage 2,000 Watts Pan Capacity 34 Full-Size Pans Number of Doors 1 Temperature Range 80˚F and 200˚F Slide Style Universal Number of Slides Included 18 Control Type Thermostatic Colour Red Material Aluminum Type Holding/Proofing Cabinet NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. 5-20P This product comes with a NEMA 5-20P plug. Files Spec Sheet

Switch between heated holding and proofing with one button Holds up to 16 full-size pans Universal slide style Half-size cabinet Clear polycarbonate door 120V / 60 Hz / 1 Phase Description Easily switch between holding and proofing modes with the Metro C515-CFC-U Half-Size Non-Insulated Heated Holding and Proofing Cabinet Combination. Heated Holding and Proofing Modes With just one switch you’ll be able to toggle between heated holding and proofing modes to suit your needs. Your freshly cooked food will be kept hot and ready-to-serve when using the cabinet’s heated holding mode. The adjustable dial, let’s you easily set the cabinet temperature between 80˚F and 190˚F in order to keep any type of dish at its required temperature for serving. When needed for proofing, you can easily set the temperature to lower levels as well as adjust the humidity up to 95% RH in order to effectively ready dough for baking a number of different bread products. This high-performance cabinet delivers 2,000 watts of power giving you the confidence that your food is being held at safe temperatures at all times. High Capacity and Versatile Cabinet The Metro C515-CFC-U is a half-size cabinet and comes equipped with 8 universal slides for holding a variety of pans. The nickel-chrome electroplated wire slides are adjustable on 1.5” increments giving you the option to add more as needed. The slide style offers you the convenience of holding up to (8) 18” x 26” pans or up to 16 full-size 12” x 20” GN pans. The aluminum cabinet comes standard with 5” swivel casters with brakes on the front set allowing you to easily move the unit as needed for cleaning or maintenance. It features a clear aluminum and polycarbonate door so you can see and monitor your products inside at all times without opening it up and disrupting the process. Read more Specifications Specifications Model C515-CFC-U Width 25.12 inches Depth 30.25 inches Height 42.75 inches Amps 16.7 Amps Voltage 120V Hertz 60 Hz Phase 1 Phase Wattage 2,000 Watts Pan Capacity 16 Full-Size Pans Number of Doors 1 Temperature Range 80˚F and 190˚F Max Humidity 95% Slide Style Universal Number of Slides Included 8 Control Type Thermostatic Colour Silver Material Aluminum Type Holding/Proofing Cabinet NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. 5-20P This product comes with a NEMA 5-20P plug. Files Spec Sheet

Designed to keep food warm and fresh for extended periods Spacious interior with 9 adjustable shelves for versatile storage options Fully insulated cabinet with environmentally friendly foaming material prevents heat loss Features four(4) casters standard – two locking, two swivels for easy mobility Ideal for use in restaurants, catering businesses, and other food service establishments Description Introducing the Atosa ATHC-9P Heated Insulated Cabinet - 120 V, the ultimate solution for keeping your food hot and fresh. This top-of-the-line commercial cabinet is designed to keep your food at the perfect temperature, making it perfect for catering events, buffets, and restaurants. With its innovative heating system and insulated design, this cabinet ensures that your food stays at optimal serving temperature throughout the day. Constructed with high-quality materials, the Atosa ATHC-9P Heated Insulated Cabinet - 120 V is built to withstand the demands of a busy commercial kitchen. Its durable stainless steel exterior not only adds a sleek and professional look but also makes it easy to clean and maintain. The interior is lined with heavy-duty insulation, providing excellent heat retention for your food. Equipped with 120 V of power, this heated cabinet is capable of maintaining temperatures between 90°F - 220°F (32°C - 104°C), ensuring that your food stays hot until it is ready to be served. It also features a digital temperature control panel, allowing you to easily adjust and monitor the temperature to meet the specific needs of your food items. Read more Specifications Specifications Model ATHC-9P Width 25.10 Inches Depth 30.70 Inches Height 42.70 Inches Weight 168 Lbs Voltage 120 V Wattage 2000 W Frequency 60 F Capacity (Layers) 9 Layers/Pans Temperature Range 90°F - 220°F (32°C - 104°C) Material Stainless Steel Product Type Holding Cabinet ETL Certified Determined through independent testing and periodic follow-up inspections by NRTL. This item meets North American product safety standards and published industry standards. ETL Sanitation List This item demonstrates compliance to North American sanitation standards 5-20P This product comes with a NEMA 5-20P plug. Files Spec Sheet

Ideal for holding pre-cooked foods at safe temperatures for extended periods of time Features a stainless steel exterior and interior for easy cleaning and durability Heating mode with adjustable temperature settings between 80°F and 220°F Accommodates up to 18 full-size food pans 1.3" clearance between slides Proof mode has 10 adjustments for adjusting humidity level Comes with 4" casters for easy mobility Transparent clear polycarbonate door with 90° stay open feature for loading of product Description The Atosa ATHC-18P 18-Pan Heated Insulated Cabinet is a heavy-duty, high-performance food-holding solution. With its adjustable thermostat, this heated cabinet can maintain temperatures between 80°F and 220°F, allowing you to store and serve a variety of food items. This unit also features a durable stainless steel construction for long-term use, as well as an insulated interior for optimum energy efficiency. Designed with convenience in mind, this unit offers an adjustable shelf to accommodate up to 18 full-size pans, as well as a transparent clear polycarbonate door with 90° stay open feature for loading of product. Its heavy-duty casters ensure easy maneuverability for versatility and convenience. This cabinet is ideal for commercial kitchens, school cafeterias, and other food-serving applications. Make sure to keep your food at the ideal serving temperature with the Atosa ATHC-18P 18-Pan Heated Insulated Cabinet. Read more Specifications Specifications Model ATHC-18P Width 25.1 Inches Depth 30.7 Inches Height 69.7 Inches Capacity 18 Pans (18" x 26") Voltage 120V Frequency 60 Hz Wattage 2000W Temperature Control 80°F - 220°F Product Type Holding Cabinet ETL Certified Determined through independent testing and periodic follow-up inspections by NRTL. This item meets North American product safety standards and published industry standards. ETL Sanitation List This item demonstrates compliance to North American sanitation standards 5-20P This product comes with a NEMA 5-20P plug. Files Spec Sheet

Two Separate heated cabinets with individual controls for versatility Fully insulated, 22 gauge stainless steel cabinet with reinforced internal framework Deluxe Controls with LED Digital Display Antimicrobial, magnetic door latches for easy access 120V, 1800W Description Safely and conveniently hold food prior to service with the Cres Cor 1000-HH-SS-2DX insulated full height holding cabinet! Designed with deluxe controls and a large, LED digital display with convenient dials, the unit quickly heats to 200 degrees Fahrenheit, providing you with the efficiency you need when busy with pre-meal preparations. Plus, because the compartments are separate with their own controls, you can set them independently for different purposes as your needs evolve throughout the event. This unit is fully insulated to help trap in the heat and to add structural rigidity for durable performance. Made of 20 gauge stainless steel and reinforced by an internal framework, the cabinet is sure to become a reliable staple in your bustling business! Accessing the interior is easy too, thanks to two insulated doors outfitted with antimicrobial, magnetic latches for sanitation and ease of use. Inside, the cabinet houses wire pan supports that are removable for easy cleaning. They are spaced on 2 3/4" centers to accommodate 16 full size sheet pans or food pans. Outfitted with a set of 4 heavy-duty, 5" swivel casters, the unit is perfect for both holding and transport applications. Two of the casters include brakes to help stabilize the unit during product storage and removal, as well as to provide stability for the entire unit, especially when it's fully loaded. Before transport though, remember to use the twist-lock catch on the doors, as it secures the doors so they won't haphazardly open and endanger the food inside! This unit requires a 120V electrical connection for operation. Read more Specifications Specifications Model 1000HHSS2DX Width 22 5/8 inches Depth 32 3/4 inches Height 73 1/4 inches Voltage 120 V Wattage 1800 Watts Hertz 60 Hertz Amp 15 Amps Phase 1 Phase Type Holding Cabinets Display Type Plate Covers Wattage 1800 Watts Cabinet Size Full Height Insulated Yes Sections 1 Temperature 200 Degrees F Power Type Electric 5-20P This product comes with a NEMA 5-20P plug. Made in America This product was made in United States of America. NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. Files

This True TH-23G~FGD01 27" Reach-In Glass Swing Door Heated Cabinet is designed with enduring quality that protects your long term investment. It is designed to provide holding temperatures of 80°F to 180°F (26.6°C to 82.2°C). Heating system controlled by exterior on/off switch and temperature control dial. Features : Stainless steel, tube heating element for uniform generation of electric heat. Cabinet comes with a total of 850 watts. Heating element sheathed for corrosion resistance. Low-velocity fans to assure even temperature distribution throughout the cabinet. Manually controlled vent located on top of the cabinet for positive humidity control. Exterior dial thermometer; accurate, direct Exterior - Stainless steel front. Anodized quality aluminum ends. Corrosion resistant GalFan coated steel back. Interior- Stainless steel interior liner and floor. Insulation - entire cabinet structure is foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). Energy efficient, triple pane, thermal insulated glass door assembly with extruded aluminum frame. Magnetic door gasket of one piece construction, removable without tools for ease of cleaning. Incandescent Interior lighting; safety shielded. Specifications Model TH-23G~FGD01 Width 27 Inches Depth 29.75 Inches Height 78.38 Inches Height with casters 84.312 Inches Voltage 115 Volts Wattage 850 Watts Hertz 60 Hertz Phase 1 Amps 7.8 Amps Number of Doors 1 Door Style Swing Door Type Glass Material Construction Stainless Steel Heat Temperature 80 - 180°F / 26.6 - 82.2°C Product Type Heated Cabinet Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. UL Classified EPH Complies with UL safety standards and ANSI/NSF standards. 5-15P This product comes with a NEMA 5-15P plug.

This True TH-23 27" Reach-In Solid Swing Heated Cabinet is designed to provide holding temperatures of 80°F to 180°F (26.6°C to 82.2°C). Heating system controlled by exterior on/off switch and temperature control dial. The cabinet is made from stainless steel, tube heating element for uniform generation of electric heat. Cabinet comes with a total of 850 watts. Heating element sheathed for corrosion resistance. Features : Low-velocity fans to assure even temperature distribution throughout the cabinet. Manually controlled vent located on top of the cabinet for positive humidity control. Exterior dial thermometer; accurate, direct reading of internal cabinet temperature. Exterior - Stainless steel front. Anodized quality aluminum ends. Corrosion resistant GalFan coated steel back. Interior- Stainless steel interior liner and floor. Insulation - entire cabinet structure and solid door are foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). Stainless steel exterior and liner. Door opens within cabinet dimension. Door lock standard. Magnetic door gasket of one piece construction, removable without tools for ease of cleaning. Specifications Model TH-23 Width 27 Inches Depth 29.5 Inches Height 78.38 Inches Height with casters 84.312 Inches Voltage 115 Volts Wattage 850 Watts Hertz 60 Hertz Phase 1 Amps 7.8 Amps Number of Doors 1 Door Style Swing Door Type Solid Material Construction Stainless Steel Heat Temperature 80 - 180°F / 26.6 - 82.2°C Product Type Heated Cabinet Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. UL Classified EPH Complies with UL safety standards and ANSI/NSF standards. 5-15P This product comes with a NEMA 5-15P plug.

This True STR2HRT-2S-2S 68" Roll-Thru Solid Swing Door Heating and Holding Cabinet is designed to provide holding temperatures of 140°F to 180°F (60°C to 82.2°C). Heating system controlled by exterior on/off switch and electronic temperature control. It is equipped with low velocity fans to assure even temperature distribution throughout the cabinet. Fans are controlled by exterior on/ off switch. The cabinet features two stainless steel for corrosion resistance, finned tube heating elements per section with 1000 watts each for uniform generation of electric heat. Cabinet comes with a total of 4000 watts. Features: Manually controlled vent located on top of the cabinet for positive humidity control. Stainless steel breaker caps. Insulation - entire cabinet structure and solid door are foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). Magnetic door gasket of one piece construction, removable without tools for ease of cleaning. Incandescent interior lighting; lights activated by exterior on/ off switch, safety shielded. Exterior, color coded, temperature display; accurate direct reading of internal cabinet temperature. Designed to hold warm baked or cooked food. Cabinet is not designed to heat ambient or cold product. Interior bumpers protect cabinet walls from abuse caused by roll-in carts. Specifications Model STR2HRT-2S-2S Width 68 Inches Depth 37.5 Inches Height 83.75 Inches Voltage 115 / 208 - 240 Volts Hertz 60 Hertz Phase 1 Wattage 4000 Watts Number of Doors 4 Number of Sections 2 Door Type Solid Door Style Swing Exterior Material Stainless Steel Interior Material Stainless Steel Heating Temperature 140 - 180°F / 60 - 82.2°C Product Type Holding Cabinet Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. UL Classified EPH Complies with UL safety standards and ANSI/NSF standards. 14-20P This product comes with a NEMA 14-20P plug.

This True STR2HRI-2S 68" Roll-In Solid Swing Door Holding Cabinet - 4000W is designed to provide holding temperatures of 140°F to 180°F (60°C to 82.2°C). Heating system controlled by exterior on/off switch and electronic temperature control. It is equipped with low-velocity fans to assure even temperature distribution throughout the cabinet. Fans are controlled by exterior on/off switch. The cabinet features two stainless steel for corrosion resistance, finned tube heating elements per section (1000 watts each) for uniform generation of electric heat. Cabinet comes with a total of 4000 watts. Features: Manually controlled vent located on top of the cabinet for positive humidity control. Stainless steel breaker caps. Insulation - entire cabinet structure and solid door are foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). Magnetic door gaskets of one piece construction, removable without tools for ease of cleaning. Incandescent interior lighting; lights activated by exterior on/off switch, safety shielded. Exterior, color coded, temperature display; accurate direct reading of internal cabinet temperature. Designed to hold warm baked or cooked food. Cabinet is not designed to heat ambient or cold product. Specifications Model STR2HRI-2S Width 68 Inches Depth 34.75 Inches Height 77.75 Inches Voltage 115 / 208 - 240 Volts Hertz 60 Hertz Phase 1 Wattage 4000 Watts Number of Doors 2 Number of Sections 2 Door Type Solid Door Style Swing Exterior Material Stainless Steel Interior Material Stainless Steel Heating Temperature 140 - 180°F / 60 - 82.2°C NEMA N/A Product Type Holding Cabinet Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. UL Classified EPH Complies with UL safety standards and ANSI/NSF standards.

This True STR2HPT-2S-2S 52" Pass-Thru Solid Front / Solid Rear Swing Door Heating and Holding Cabinet is designed to provide holding temperatures of 140°F to 180°F (60°C to 82.2°C). Heating system controlled by exterior on/off switch and electronic temperature control. The cabinet features one stainless steel for corrosion resistance, heating element per section for uniform generation of electric heat. Cabinet comes with a total of 3000 watts. Features: Manually controlled vent located on top of the cabinet for positive humidity control. Insulation - entire cabinet structure and solid door are foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). Magnetic door gaskets of one piece construction, removable without tools for ease of cleaning. Exterior digital temperature display, available with either °F or °C. Designed to hold warm baked or cooked food. Cabinet is not designed to heat ambient or cold product. Unit comes with 3 feed wires (including ground) to be hardwired at installation site to a 208-240/60 Hz. single phase, 20 amp dedicated circuit. Specifications Model STR2HPT-2S-2S Width 52.62 Inches Depth 36.12 Inches Height 77.75 Inches Height with casters 84.125 Inches Voltage 208 - 240 Volts Hertz 60 Hertz Phase 1 Wattage 3000 Watts Number of Doors 4 Number of Sections 2 Door Type Solid Front / Solid Rear Door Style Swing Exterior Material Stainless Steel Interior Material Stainless Steel Heating Temperature 140 - 180°F / 60 - 82.2°C NEMA N/A Product Type Holding Cabinet Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. UL Classified EPH Complies with UL safety standards and ANSI/NSF standards.

This True STR2HPT-2G-2S 52" Reach-In Pass-Thru Glass Front / Solid Rear Swing Door Holding Cabinet - 3000W is designed to provide holding temperatures of 140°F to 180°F (60°C to 82.2°C). Heating system controlled by exterior on/off switch and electronic temperature control. The cabinet features one stainless steel for corrosion resistance, heating element for uniform generation of electric heat. Cabinet comes with a total of 3000 watts. Features: Manually controlled vent located on top of the cabinet for positive humidity control. Insulation - entire cabinet structure and solid door are foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). Magnetic door gaskets of one piece construction, removable without tools for ease of cleaning. Exterior digital temperature display, available with either °F or °C. Designed to hold warm baked or cooked food. Cabinet is not designed to heat ambient or cold product. Unit comes with 3 feed wires (including ground) to be hardwired at installation site to a 208-240/60 Hz. single phase, 20 amp dedicated circuit. Specifications Model STR2HPT-2G-2S Width 52.62 Inches Depth 36.12 Inches Height 77.75 Inches Height with casters 84.125 Inches Voltage 208 - 240 Volts Hertz 60 Hertz Phase 1 Wattage 3000 Watts Number of Doors 4 Number of Sections 2 Door Type Glass Front / Solid Rear Door Style Swing Exterior Material Stainless Steel Interior Material Stainless Steel Heating Temperature 140 - 180°F / 60 - 82.2°C NEMA N/A Product Type Holding Cabinet Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. UL Classified EPH Complies with UL safety standards and ANSI/NSF standards.

This True STR2H-4HS 52" Reach-In Half Solid Swing Door Heating and Holding Cabinet is designed to provide holding temperatures of 140°F to 180°F (60°C to 82.2°C). Heating system controlled by exterior on/off switch and electronic temperature control. It is equipped with low-velocity fans to assure even temperature distribution throughout the cabinet. The product features one stainless steel for corrosion resistance, heating element for uniform generation of electric heat. Cabinet comes with a total of 3000 watts. Features: Manually controlled vent located on top of the cabinet for positive humidity control. Insulation - entire cabinet structure and solid door are foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). Magnetic door gaskets of one piece construction, removable without tools for ease of cleaning. Exterior digital temperature display, available with either °F or °C. Designed to hold warm baked or cooked food. Cabinet is not designed to heat ambient or cold product. Unit comes with 3 feed wires (including ground) to be hardwired at installation site to a 208-240/60 Hz. single phase, 20 amp dedicated circuit. Specifications Model STR2H-4HS Width 52.62 Inches Depth 33.75 Inches Height 77.75 Inches Height with casters 84.125 Inches Voltage 208 - 240 Volts Hertz 60 Hertz Phase 1 Wattage 3000 Watts Number of Doors 4 Number of Sections 2 Door Type Solid Door Style Swing Exterior Material Stainless Steel Interior Material Stainless Steel Heating Temperature 140 - 180°F / 60 - 82.2°C NEMA N/A Product Type Holding Cabinet Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. UL Classified EPH Complies with UL safety standards and ANSI/NSF standards.

This True STR2H-4HG 52" Reach-In Four Half Glass Swing Door Holding Cabinet is designed to provide holding temperatures of 140°F to 180°F (60°C to 82.2°C). Heating system controlled by exterior on/off switch and electronic temperature control. It features one stainless steel for corrosion resistance ,heating element for uniform generation of electric heat. Cabinet comes with a total of 3000 watts. Features: Equipped with low-velocity fans to assure even temperature distribution throughout the cabinet. Manually controlled vent located on top of the cabinet for positive humidity control. Insulation - entire cabinet structure and solid door are foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). “Low-E”, double pane thermal insulated glass. Positive seal self-closing doors with 120° stay open feature. Lifetime guaranteed external cam lift door hinges, four (4) per door section. Magnetic door gaskets of one piece construction, removable without tools for ease of cleaning. Exterior digital temperature display, available with either °F or °C. Designed to hold warm baked or cooked food. Cabinet is not designed to heat ambient or cold product. Specifications Model STR2H-4HG Width 52.62 Inches Depth 33.75 Inches Height 77.75 Inches Height with casters 84.125 Inches Voltage 208 - 240 Volts Hertz 60 Hertz Phase 1 Wattage 3000 Watts Number of Doors 4 Number of Sections 2 Door Type Glass Door Style Swing Exterior Material Stainless Steel Interior Material Stainless Steel Heating Temperature 140 - 180°F / 60 - 82.2°C NEMA N/A Product Type Holding Cabinet Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. UL Classified EPH Complies with UL safety standards and ANSI/NSF standards.

This True STR2H-2S 52" Reach-In Solid Swing Door Heating and Holding Cabinet is designed to provide holding temperatures of 140°F to 180°F (60°C to 82.2°C). Heating system controlled by exterior on/off switch and electronic temperature control. It is equipped with low-velocity fans to assure even temperature distribution throughout the cabinet. The cabinet features one stainless steel for corrosion resistance, heating element for uniform generation of electric heat. Cabinet comes with a total of 3000 watts. Features: Manually controlled vent located on top of the cabinet for positive humidity control. Insulation - entire cabinet structure and solid door are foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). Magnetic door gaskets of one piece construction, removable without tools for ease of cleaning. Exterior digital temperature display, available with either °F or °C. Designed to hold warm baked or cooked food. Cabinet is not designed to heat ambient or cold product. True requires that a sole use circuit be dedicated for the unit. Unit comes with 3 feed wires (including ground) to be hardwired at installation site to a 208-240/60 Hz. single phase, 20 amp dedicated circuit. Specifications Model STR2H-2S Width 52.62 Inches Depth 33.75 Inches Height 77.75 Inches Height with casters 84.125 Inches Voltage 208 - 240 Volts Hertz 60 Hertz Phase 1 Wattage 3000 Watts Number of Doors 2 Number of Sections 2 Door Type Solid Door Style Swing Exterior Material Stainless Steel Interior Material Stainless Steel Heating Temperature 140 - 180°F / 60 - 82.2°C NEMA N/A Product Type Holding Cabinet Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. UL Classified EPH Complies with UL safety standards and ANSI/NSF standards.

This True STR2H-2G 52" Reach-In Glass Swing Door Cabinet is designed to provide holding temperatures of 140°F to 180°F (60°C to 82.2°C). Heating system controlled by exterior on/off switch and electronic temperature control. The cabinet features One stainless steel for corrosion resistance, heating element for uniform generation of electric heat. Cabinet comes with a total of 3000 watts. Features: Equipped with low-velocity fans to assure even temperature distribution throughout the cabinet. Manually controlled vent located on top of the cabinet for positive humidity control. Insulation - entire cabinet structure and solid door are foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). “Low-E”, double pane thermal insulated glass. Magnetic door gaskets of one piece construction, removable without tools for ease of cleaning. Exterior digital temperature display, available with either °F or °C. Designed to hold warm baked or cooked food. Cabinet is not designed to heat ambient or cold product. Unit comes with 3 feed wires (including ground) to be hardwired at installation site to a 208-240/60 Hz. single phase, 20 amp dedicated circuit. Specifications Model STR2H-2G Width 52.62 Inches Depth 33.75 Inches Height 77.75 Inches Height with casters 84.125 Inches Voltage 208 - 230 Volts Hertz 60 Hertz Phase 1 Wattage 3000 Watts Number of Doors 2 Number of Sections 2 Door Type Glass Door Style Swing Exterior Material Stainless Steel Interior Material Stainless Steel Heating Temperature 140 - 180°F / 60 - 82.2°C NEMA N/A Product Type Holding Cabinet Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. UL Classified EPH Complies with UL safety standards and ANSI/NSF standards.

This True STR1HRT89-1S-1S 35" x 88" roll-thru solid swing door heating and holding cabinet is designed to provide holding temperatures of 140°F to 180°F (60°C to 82.2°C). Heating system controlled by exterior on/off switch and electronic temperature control. The cabinet has a two (2) stainless steel (for corrosion resistance), finned tube heating elements (1000 watts each) for uniform generation of electric heat. Cabinet comes with a total of 2000 watts. Features: Equipped with low-velocity fans to assure even temperature distribution throughout the cabinet. Fans are controlled by exterior on/off switch. Manually controlled vent located on top of the cabinet for positive humidity control. Stainless steel breaker caps. Insulation - entire cabinet structure and solid door are foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). Magnetic door gasket of one piece construction, removable without tools for ease of cleaning. Incandescent interior lighting; lights activated by exterior on/off switch, safety shielded. Exterior, color coded, temperature display; accurate direct reading of internal cabinet temperature. Designed to hold warm baked or cooked food. Cabinet is not designed to heat ambient or cold product. Interior bumpers protect cabinet walls from abuse caused by rollin carts. Specifications Model STR1HRT89-1S-1S Width 35 Inches Depth 37.5 Inches Height 88.75 Inches Voltage 115 / 208 - 230 Volts Hertz 60 Hertz Phase 1 Wattage 2000 Watts Number of Doors 1 Number of Sections 1 Door Type Solid Door Style Swing Door Exterior Material Stainless Steel Interior Material Stainless Steel Heating Temperature 140 - 180°F / 60 - 82.2°C NEMA 14-20P Product Type Roll-In Holding Cabinet Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. UL Classified EPH Complies with UL safety standards and ANSI/NSF standards.

This True STR1HRT-1S-1S 35" x 83" Roll-Thru Solid Swing Door Heating and Holding Cabinet is designed to provide holding temperatures of 140°F to 180°F (60°C to 82.2°C). Heating system controlled by exterior on/off switch and electronic temperature control. Two (2) stainless steel (for corrosion resistance), finned tube heating elements (1000 watts each) for uniform generation of electric heat. Cabinet comes with a total of 2000 watts. Features: Equipped with low-velocity fans to assure even temperature distribution throughout the cabinet. Fans are controlled by exterior on/off switch. Manually controlled vent located on top of the cabinet for positive humidity control. Stainless steel breaker caps. Insulation - entire cabinet structure and solid door are foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). Magnetic door gasket of one piece construction, removable without tools for ease of cleaning. Incandescent interior lighting; lights activated by exterior on/off switch, safety shielded. Exterior, color coded, temperature display; accurate direct reading of internal cabinet temperature. Designed to hold warm baked or cooked food. Cabinet is not designed to heat ambient or cold product. Interior bumpers protect cabinet walls from abuse caused by rollin carts. Specifications Model STR1HRT-1S-1S Width 35 Inches Depth 37.5 Inches Height 83.75 Inches Voltage 115 / 208 - 230 Volts Hertz 60 Hertz Phase 1 Wattage 2000 Watts Number of Doors 1 Number of Sections 1 Door Type Solid Door Style Swing Door Exterior Material Stainless Steel Interior Material Stainless Steel Heating Temperature 140 - 180°F / 60 - 82.2°C NEMA 14-20P Product Type Roll-In Holding Cabinet Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. UL Classified EPH Complies with UL safety standards and ANSI/NSF standards.

This True STR1HRI89-1S 35" x 88" Solid Swing Door Heating and Holding Cabinet is designed to provide holding temperatures of 140°F to 180°F (60°C to 82.2°C). Heating system controlled by exterior on/off switch and electronic temperature control. The cabinet is equipped with low-velocity fans to assure even temperature distribution throughout the cabinet. Fans are controlled by exterior on/off switch. Features: Two (2) stainless steel (for corrosion resistance), finned tube heating elements (1000 watts each) for uniform generation of electric heat. Cabinet comes with a total of 2000 watts. Manually controlled vent located on top of the cabinet for positive humidity control. Stainless steel breaker caps. Insulation - entire cabinet structure and solid door are foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). Magnetic door gasket of one piece construction, removable without tools for ease of cleaning. Incandescent interior lighting; lights activated by exterior on/off switch, safety shielded. Exterior, color coded, temperature display; accurate direct reading of internal cabinet temperature. Designed to hold warm baked or cooked food. Cabinet is not designed to heat ambient or cold product. Interior bumpers protect cabinet walls from abuse caused by rollin carts. Specifications Model STR1HRI89-1S Width 35 Inches Depth 34.75 Inches Height 88.75 Inches Voltage 115 / 208 - 230 Volts Hertz 60 Hertz Phase 1 Wattage 2000 Watts Number of Doors 1 Number of Sections 1 Door Type Solid Door Style Swing Door Exterior Material Stainless Steel Interior Material Stainless Steel Heating Temperature 140 - 180°F / 60 - 82.2°C NEMA 14-20P Product Type Holding Cabinet Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. UL Classified EPH Complies with UL safety standards and ANSI/NSF standards.

This True STR1HRI-1S 35" x 83" roll-in solid swing door heating and holding cabinet is designed to provide holding temperatures of 140°F to 180°F (60°C to 82.2°C). Heating system controlled by exterior on/off switch and electronic temperature control. It is equipped with low-velocity fans to assure even temperature distribution throughout the cabinet. Fans are controlled by exterior on/off switch. The cabinet features two stainless steel for corrosion resistance, finned tube heating elements (1000 watts each) for uniform generation of electric heat. Cabinet comes with a total of 2000 watts. Features: Manually controlled vent located on top of the cabinet for positive humidity control. Stainless steel breaker caps. Insulation - entire cabinet structure and solid door are foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). Magnetic door gasket of one piece construction, removable without tools for ease of cleaning. Incandescent interior lighting; lights activated by exterior on/ off switch, safety shielded. Exterior digital temperature display, available with either °F or °C. Designed to hold warm baked or cooked food. Cabinet is not designed to heat ambient or cold product. Interior bumpers protect cabinet walls from abuse caused by roll-in carts. Specifications Model STR1HRI-1S Width 35 Inches Depth 34.75 Inches Height 83.75 Inches Voltage 115 / 208 - 240 Volts Hertz 60 Hertz Phase 1 Wattage 2000 Watts Number of Doors 1 Number of Sections 1 Door Type Solid Door Style Swing Door Exterior Material Stainless Steel Interior Material Stainless Steel Heating Temperature 140 - 180°F / 60 - 82.2°C NEMA 14-20P Product Type Roll-In Holding Cabinet Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. UL Classified EPH Complies with UL safety standards and ANSI/NSF standards.

This True STR1HPT-1S-1S Pass-Thru Solid Front / Solid Rear Swing Door Heating and Holding Cabinet is designed to provide holding temperatures of 140°F to 180°F (60°C to 82.2°C). Heating system controlled by exterior on/off switch and electronic temperature control. It features one stainless steel for corrosion resistance, heating element for uniform generation of electric heat. Cabinet comes with a total of 1500 watts. Features: Manually controlled vent located on top of the cabinet for positive humidity control. Insulation - entire cabinet structure and solid door are foamed-in-place using Ecomate. A high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). Magnetic door gaskets of one piece construction, removable without tools for ease of cleaning. Exterior digital temperature display, available with either °F or °C. Designed to hold warm baked or cooked food. Cabinet is not designed to heat ambient or cold product. Unit completely pre-wired at factory and ready for final connection to a 208-240/60/1 Hz. single phase, 15 amp dedicated outlet. Cord and plug set included. Specifications Model STR1HPT-1S-1S Width 27.5 Inches Depth 36.12 Inches Height 77.75 Inches Height with casters 84.125 Inches Voltage 208 - 240 Volts Hertz 60 Hertz Phase 1 Wattage 1500 Watts Features Pass-Thru Number of Doors 2 Number of Sections 1 Door Type Solid Front / Solid Rear Door Style Swing Door Exterior Material Stainless Steel Interior Material Stainless Steel Heating Temperature 140 - 180°F / 60 - 82.2°C Product Type Pass-Thru Holding Cabinet Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. UL Classified EPH Complies with UL safety standards and ANSI/NSF standards. 6-15P This product comes with a NEMA 6-15P plug.

This True STR1HPT-1G-1S 27.5" pass-thru glass front / solid rear swing door heated cabinet is designed to provide holding temperatures of 140°F to 180°F (60°C to 82.2°C). Heating system controlled by exterior on/off switch and electronic temperature control. The cabinet features one stainless steel for corrosion resistance, heating element for uniform generation of electric heat. Cabinet comes with a total of 1500 watts. Features: Manually controlled vent located on top of the cabinet for positive humidity control. Insulation - entire cabinet structure and solid door are foamed-in-place using Ecomate. A high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). Glass door - “Low-E”, double pane thermal insulated glass. Solid door - Stainless steel. Positive seal self-closing doors with 120° stay open feature. Magnetic door gaskets of one piece construction, removable without tools for ease of cleaning. Exterior digital temperature display, available with either °F or °C. Designed to hold warm baked or cooked food. Cabinet is not designed to heat ambient or cold product. Unit completely pre-wired at factory and ready for final connection to a 208-240/60/1 Hz. single phase, 15 amp dedicated outlet. Cord and plug set included. Specifications Model STR1HPT-1G-1S Width 27.5 Inches Depth 36.12 Inches Height 77.75 Inches Voltage 208 - 240 Volts Hertz 60 Hertz Phase 1 Wattage 1500 Watts Features Pass-Thru Number of Doors 2 Number of Sections 1 Door Type Glass Front / Solid Rear Door Style Swing Door Exterior Material Stainless Steel Interior Material Stainless Steel Heating Temperature 140 - 180°F / 60 - 82.2°C Product Type Pass-Thru Holding Cabinet Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. UL Classified EPH Complies with UL safety standards and ANSI/NSF standards. 6-15P This product comes with a NEMA 6-15P plug.

This True STR1H-2HS 27.5" Reach-In Solid Half Swing Door Heating and Holding Cabinet is designed to provide holding temperatures of 140°F to 180°F (60°C to 82.2°C). Heating system controlled by exterior on/off switch and electronic temperature control. The cabinet features one stainless steel for corrosion resistance, heating element for uniform generation of electric heat. Cabinet comes with a total of 1500 watts. Features: Equipped with low-velocity fans to assure even temperature distribution throughout the cabinet. Manually controlled vent located on top of the cabinet for positive humidity control. Insulation - entire cabinet structure and solid door are foamed-in-place using Ecomate. A high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). Magnetic door gaskets of one piece construction, removable without tools for ease of cleaning. Exterior digital temperature display, available with either °F or °C. Designed to hold warm baked or cooked food. Cabinet is not designed to heat ambient or cold product. Unit completely pre-wired at factory and ready for final connection to a 208-240/60/1 Hz. single phase, 15 amp dedicated outlet. Cord and plug set included. Specifications Model STR1H-2HS Width 27.5 Inches Depth 33.75 Inches Height 77.75 Inches Height with casters 84.125 Inches Voltage 208 - 240 Volts Hertz 60 Hertz Phase 1 Wattage 1500 Watts Number of Doors 2 Number of Sections 1 Door Type Solid Door Style Swing Door Exterior Material Stainless Steel Interior Material Stainless Steel Heating Temperature 140 - 180°F / 60 - 82.2°C Product Type Reach-In Holding Cabinet Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. UL Classified EPH Complies with UL safety standards and ANSI/NSF standards. 6-15P This product comes with a NEMA 6-15P plug.

This True STR1H-2HG 27.5" reach-in glass half swing door heated cabinet is designed to provide holding temperatures of 140°F to 180°F (60°C to 82.2°C). Heating system controlled by exterior on/off switch and electronic temperature control. It is equipped with low-velocity fans to assure even temperature distribution throughout the cabinet. The cabinet features one stainless steel for corrosion resistance, heating element for uniform generation of electric heat. Cabinet comes with a total of 1500 watts. Features: Manually controlled vent located on top of the cabinet for positive humidity control. Insulation - entire cabinet structure and solid door are foamed-in-place using Ecomate. A high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). “Low-E”, double pane thermal insulated glass. Magnetic door gaskets of one piece construction, removable without tools for ease of cleaning. Exterior digital temperature display, available with either °F or °C. Designed to hold warm baked or cooked food. Cabinet is not designed to heat ambient or cold product. Specifications Model STR1H-2HG Width 27.5 Inches Depth 33.75 Inches Height 77.75 Inches Height with casters 84.125 Inches Voltage 208 - 240 Volts Hertz 60 Hertz Phase 1 Wattage 1500 Watts Number of Doors 2 Number of Sections 1 Door Type Glass Door Style Swing Door Exterior Material Stainless Steel Interior Material Stainless Steel Heating Temperature 140 - 180°F / 60 - 82.2°C Product Type Reach-In Holding Cabinet Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. UL Classified EPH Complies with UL safety standards and ANSI/NSF standards. 6-15P This product comes with a NEMA 6-15P plug.

This True STR1H-1S 27.5" reach-in solid swing door heating and holding cabinet is designed to provide holding temperatures of 140°F to 180°F (60°C to 82.2°C). Heating system controlled by exterior on/off switch and electronic temperature control. The cabinet is equipped with low-velocity fans to assure even temperature distribution throughout the cabinet. It features one stainless steel for corrosion resistance,heating element for uniform generation of electric heat. Cabinet comes with a total of 1500 watts. Features: Manually controlled vent located on top of the cabinet for positive humidity control. Insulation - entire cabinet structure and solid door are foamed-in-place using Ecomate. A high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). Magnetic door gaskets of one piece construction, removable without tools for ease of cleaning. Exterior digital temperature display, available with either °F or °C. Designed to hold warm baked or cooked food. Cabinet is not designed to heat ambient or cold product. Unit completely pre-wired at factory and ready for final connection to a 208-240/60/1 Hz. single phase, 15 amp dedicated outlet. Cord and plug set included. Specifications Model STR1H-1S Width 27.5 Inches Depth 33.75 Inches Height 77.75 Inches Height with casters 84.125 Inches Voltage 208 - 240 Volts Hertz 60 Hertz Phase 1 Wattage 1500 Watts Number of Doors 1 Number of Sections 1 Door Type Solid Door Style Swing Door Exterior Material Stainless Steel Interior Material Stainless Steel Heating Temperature 140 - 180°F / 60 - 82.2°C Product Type Reach-In Holding Cabinet Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. UL Classified EPH Complies with UL safety standards and ANSI/NSF standards. 6-15P This product comes with a NEMA 6-15P plug.

This True STR1H-1G 27.5" reach-in glass swing door heated cabinet is designed to provide holding temperatures of 140°F to 180°F (60°C to 82.2°C). Heating system controlled by exterior on/off switch and electronic temperature control. The cabinet is equipped with low-velocity fans to assure even temperature distribution throughout the cabinet. It has one stainless steel for corrosion resistance, heating element for uniform generation of electric heat. Cabinet comes with a total of 1500 watts. Features: Manually controlled vent located on top of the cabinet for positive humidity control. Insulation - entire cabinet structure and solid door are foamed-in-place using Ecomate. A high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). “Low-E”, double pane thermal insulated glass. Magnetic door gaskets of one piece construction, removable without tools for ease of cleaning. Exterior digital temperature display, available with either °F or °C. Designed to hold warm baked or cooked food. Cabinet is not designed to heat ambient or cold product. Unit completely pre-wired at factory and ready for final connection to a 208-230/60/1 Hz. single phase, 15 amp dedicated outlet. Cord and plug set included. Specifications Model STR1H-1G Width 27.5 Inches Depth 33.75 Inches Height 77.75 Inches Height with casters 84.125 Inches Voltage 208 - 230 Volts Hertz 60 Hertz Phase 1 Wattage 1500 Watts Number of Doors 1 Number of Sections 1 Door Type Glass Door Style Swing Door Exterior Material Stainless Steel Interior Material Stainless Steel Heating Temperature 140 - 180°F / 60 - 82.2°C Product Type Reach-In Holding Cabinet Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. UL Classified EPH Complies with UL safety standards and ANSI/NSF standards. 6-15P This product comes with a NEMA 6-15P plug.

This True STG2HRT-2S-2S 68" roll-thru solid swing door heated cabinet is designed to provide holding temperatures of 140°F to 180°F (60°C to 82.2°C). Heating system controlled by exterior on/off switch and electronic temperature control. The cabinet has two stainless steel for corrosion resistance, finned tube heating elements per section (1000 watts each) for uniform generation of electric heat, and it comes with a total of 4000 watts. Features: Equipped with low velocity fans to assure even temperature distribution throughout the cabinet. Fans are controlled by exterior on/ off switch. Manually controlled vent located on top of the cabinet for positive humidity control. Stainless steel breaker caps. Insulation - entire cabinet structure and solid door are foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). Magnetic door gasket of one piece construction, removable without tools for ease of cleaning. Incandescent interior lighting; lights activated by exterior on/ off switch, safety shielded. Exterior, color coded, temperature display; accurate direct reading of internal cabinet temperature. Designed to hold warm baked or cooked food. Cabinet is not designed to heat ambient or cold product. Unit completely pre-wired at factory and ready for final connection to a 115/208- 240/60 Hz. single phase, 20 amp dedicated outlet. Cord and plug set included. Specifications Model STG2HRT-2S-2S Width 68 Inches Depth 37.5 Inches Height 83.75 Inches Voltage 115 / 208 - 240 Volts Hertz 60 Hertz Phase 1 Wattage 4000 Watts Number of Doors 4 Number of Sections 2 Door Type Solid Door Style Swing Door Exterior Material Stainless Steel with Aluminum Interior Material Aluminum and Stainless Steel Heating Temperature 140 - 180°F / 60 - 82.2°C Product Type Roll-Thru Holding Cabinet Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. UL Classified EPH Complies with UL safety standards and ANSI/NSF standards. 14-20P This product comes with a NEMA 14-20P plug.

True STG2HRI-2S Roll-In Solid Swing Door Heated Cabinet is designed to provide holding temperatures of 140°F to 180°F (60°C to 82.2°C). Heating system controlled by exterior on/off switch and electronic temperature control. Features: Two (2) stainless steel (for corrosion resistance), finned tube heating elements per section (1000 watts each) for uniform generation of electric heat. Cabinet comes with a total of 4000 watts. Equipped with low-velocity fans to assure even temperature distribution throughout the cabinet. Fans are controlled by exterior on/off switch. Manually controlled vent located on top of the cabinet for positive humidity control. Stainless steel breaker caps. Insulation - entire cabinet structure and solid door are foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). Magnetic door gaskets of one piece construction, removable without tools for ease of cleaning. Incandescent interior lighting; lights activated by exterior on/off switch, safety shielded. Exterior, color coded, temperature display; accurate direct reading of internal cabinet temperature. • Designed to hold warm baked or cooked food. Cabinet is not designed to heat ambient or cold product. Interior bumpers protect cabinet walls from abuse caused by rollin carts. Specifications Model STG2HRI-2S Width 68 Inches Depth 34.75 Inches Height 83.75 Inches Voltage 115 / 208 - 240 Volts Hertz 60 Hertz Phase 1 Wattage 4000 Watts Number of Doors 2 Number of Sections 2 Door Type Solid Door Style Swing Door Exterior Material Stainless Steel with Aluminum Interior Material Aluminum and Stainless Steel Heating Temperature 140 - 180°F / 60 - 82.2°C NEMA N/A Product Type Roll-In Holding Cabinet Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. UL Classified EPH Complies with UL safety standards and ANSI/NSF standards.

This True STG2HPT-2S-2S Pass-Thru Solid Front / Solid Rear Swing Door Heated Cabinet is designed to provide holding temperatures of 140°F to 180°F (60°C to 82.2°C). Heating system controlled by exterior on/off switch and electronic temperature control. Features: One (1) stainless steel (for corrosion resistance),heating element per section for uniform generation of electric heat. Cabinet comes with a total of 3000 watts. Manually controlled vent located on top of the cabinet for positive humidity control. Insulation - entire cabinet structure and solid door are foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). Magnetic door gaskets of one piece construction, removable without tools for ease of cleaning. Exterior digital temperature display, available with either °F or °C . Designed to hold warm baked or cooked food. Cabinet is not designed to heat ambient or cold product. Specifications Model STG2HPT-2S-2S Width 52.62 Inches Depth 36.12 Inches Height 77.75 Inches Height with casters 84.125 Inches Voltage 208 - 240 Volts Hertz 60 Hertz Phase 1 Wattage 3000 Watts Features Pass-Thru Capacity 50.6 Cu. Ft. Number of Doors 2 Number of Sections 2 Door Type Solid Door Style Swing Door Exterior Material Stainless Steel with Aluminum Interior Material Aluminum and Stainless Steel Heating Temperature 140 - 180°F / 60 - 82.2°C NEMA N/A Product Type Reach-In Holding Cabinet Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. UL Classified EPH Complies with UL safety standards and ANSI/NSF standards.

This True STG2HPT-2G-2S 52" Pass-Thru Glass Front / Solid Rear Swing Door Heated Cabinet is designed to provide holding temperatures of 140°F to 180°F (60°C to 82.2°C). Heating system controlled by exterior on/off switch and electronic temperature control. Features: One (1) stainless steel (for corrosion resistance),heating element for uniform generation of electric heat. Cabinet comes with a total of 3000 watts. Manually controlled vent located on top of the cabinet for positive humidity control. Insulation - entire cabinet structure and solid door are foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). “Low-E”, double pane thermal insulated glass. Positive seal self-closing doors with 120° stay open feature. Lifetime guaranteed external cam lift door hinges, four (4) per door section. Magnetic door gaskets of one piece construction, removable without tools for ease of cleaning. Exterior digital temperature display, available with either °F or °C. Designed to hold warm baked or cooked food. Cabinet is not designed to heat ambient or cold product. Specifications Model STG2HPT-2G-2S Width 52.62 Inches Depth 36.12 Inches Height 77.75 Inches Voltage 208 - 240 Volts Hertz 60 Hertz Phase 1 Wattage 3000 Watts Number of Doors 2 Number of Sections 2 Door Type Glass Door Style Swing Door Exterior Material Stainless Steel with Aluminum Interior Material Aluminum and Stainless Steel Heating Temperature 140 - 180°F / 60 - 82.2°C NEMA N/A Product Type Reach-In Holding Cabinet Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. UL Classified EPH Complies with UL safety standards and ANSI/NSF standards.

This True STG2H-4HS 52" Reach-In Solid Half Swing Door Heated Cabinetdesigned to provide holding temperatures of 140°F to 180°F (60°C to 82.2°C). Heating system controlled by exterior on/off switch and electronic temperature control. Features: One (1) stainless steel (for corrosion resistance),heating element for uniform generation of electric heat. Cabinet comes with a total of 3000 watts. Equipped with low-velocity fans to assure even temperature distribution throughout the cabinet. Manually controlled vent located on top of the cabinet for positive humidity control. Insulation - entire cabinet structure and solid door are foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). Magnetic door gaskets of one piece construction, removable without tools for ease of cleaning. Exterior digital temperature display, available with either °F or °C. Designed to hold warm baked or cooked food. Cabinet is not designed to heat ambient or cold product. Specifications Model STG2H-4HS Width 52.62 Inches Depth 33.75 Inches Height 77.75 Inches Voltage 208 - 240 Volts Hertz 60 Hertz Phase 1 Wattage 3000 Watts Number of Doors 4 Number of Sections 2 Door Type Solid Door Style Swing Door Exterior Material Stainless Steel with Aluminum Interior Material Aluminum and Stainless Steel Heating Temperature 140 - 180°F / 60 - 82.2°C NEMA N/A Product Type Reach-In Holding Cabinet Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. UL Classified EPH Complies with UL safety standards and ANSI/NSF standards.

True STG2H-4HG 52" Reach-In Solid Swing Door Heated Cabinet is designed to provide holding temperatures of 140°F to 180°F (60°C to 82.2°C). Heating system controlled by exterior on/off switch and electronic temperature control. Features: One (1) stainless steel (for corrosion resistance),heating element for uniform generation of electric heat. Cabinet comes with a total of 3000 watts. Equipped with low-velocity fans to assure even temperature distribution throughout the cabinet. Manually controlled vent located on top of the cabinet for positive humidity control. Insulation - entire cabinet structure and solid door are foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). “Low-E”, double pane thermal insulated glass. Magnetic door gaskets of one piece construction, removable without tools for ease of cleaning. Exterior digital temperature display, available with either °F or °C. Designed to hold warm baked or cooked food. Cabinet is not designed to heat ambient or cold product. Unit comes with 3 feed wires (including ground) to be hardwired at installation site to a 208-240/60 Hz. single phase, 20 amp dedicated circuit. Specifications Model STG2H-4HG Width 52.62 Inches Depth 33.75 Inches Height 77.75 Inches Voltage 208 - 240 Volts Hertz 60 Hertz Phase 1 Horsepower 1 HP Wattage 3000 Watts Number of Doors 4 Number of Sections 2 Door Type Glass Door Style Swing Door Exterior Material Stainless Steel with Aluminum Interior Material Aluminum and Stainless Steel Heating Temperature 140 - 180°F / 60 - 82.2°C NEMA N/A Product Type Reach-In Holding Cabinet Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. UL Classified EPH Complies with UL safety standards and ANSI/NSF standards.

This True STG2H-2S 52" Reach-In Solid Swing Door Heated Cabinet is designed to provide holding temperatures of 140°F to 180°F (60°C to 82.2°C). Heating system controlled by exterior on/off switch and electronic temperature control. Features: One (1) stainless steel (for corrosion resistance),heating element for uniform generation of electric heat. Cabinet comes with a total of 3000 watts. Equipped with low-velocity fans to assure even temperature distribution throughout the cabinet. Manually controlled vent located on top of the cabinet for positive humidity control. Insulation - entire cabinet structure and solid door are foamed-in-place using a high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). Magnetic door gaskets of one piece construction, removable without tools for ease of cleaning. Exterior digital temperature display, available with either °F or °C . Designed to hold warm baked or cooked food. Cabinet is not designed to heat ambient or cold product. Specifications Model STG2H-2S Width 52.62 Inches Depth 33.75 Inches Height 77.75 Inches Height with casters 84.125 Inches Voltage 208 - 240 Volts Hertz 60 Hertz Phase 1 Horsepower 1 HP Wattage 3000 Watts Number of Doors 2 Number of Sections 2 Door Type Solid Door Style Swing Door Exterior Material Stainless Steel with Aluminum Interior Material Aluminum and Stainless Steel Heating Temperature 140 - 180°F / 60 - 82.2°C NEMA N/A Product Type Reach-In Holding Cabinet Made in America This product was made in United States of America. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. UL Classified EPH Complies with UL safety standards and ANSI/NSF standards.