Hot Water Dispenser

7.6 L of hot water Include drip tray Stainless steel exterior and tank Temperature settings up to 200°F / 93°C Description This Bunn HW2 7.6 L Stainless Steel Hot Water Dispenser has 7.6 liters (2 gallons) of hot water in a space-saving machine just 7.1" (18.03 cm) wide to fit any counter. Its exterior and tank are made of high quality stainless steel which is durable, rust-resistant, and easy to clean. Since the dispenser is plumbed to the water line, fresh and hot water is always available. Drip tray is included. Features: 7.6 L capacity Dimension:14.3"W x 7"D x 23.8"H Temp setting: 200°F / 93.333°C Faucet: Upper Water access: Plumbed Fitting Supplied:1/4" Male Flare Fitting Read more Specifications Specifications Model 02500.6000 Width 14.3 Inches Depth 7 Inches Height 23.8 Inches Capacity 7.57 Liters / 2 Gallons Voltage 120 Volts Amperage 15 Amps Wattage 1800 Watts Hertz 60 Hertz Phase 1 Material Stainless Steel Cord Attached Yes Temperature Setting 200°F / 93°C Product Type Hot Water Dispenser NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. UL Certified Certified by Underwriters Laboratories, this product has been stringently tested and meets safety standards. Files Spec Sheet

LED display provides simple temperature adjustment Thinsulate® tank insulation provides increased energy efficiency Programmable “Energy Saver Mode” reduces operating cost during idle periods The perfect tool for added control over quality coffee and tea Contemporary, space-saving design Digital thermostat provides constant and accurate temperatures of 60°- 212°F (15.6°-100°C) Description Get hot water regularly with exact temperature control using the H5X 5 Gallon Hot Water Dispenser. This unit contains a LED display to provide simple temperature adjustments. The H5X 5 Gallon Water Dispenser is also insulated with Thinsulate® to provide increased energy efficiency, by keeping water warm without losing heat. This sleek unit is ideal for space-saving in office settings. The Digital Thermostat provides constant and accurate temperatures of 60°- 212°F (15.6°-100°C) for repeatable results every time. Read more Specifications Specifications Model H5X / 43600.0002 Width 7.4 Inches Depth 17.6 Inches Height 28.50 Inches Water Capacity Range Medium Temp/Time Setting 212° F Inlet Water Fitting 1/4" Male Flare Fitting Voltage 208V Hertz 60 Hz Phase 1 Phase Amps 19.5 Amps Water Access Plumbed Water Type Hot - Precision Temperature Files

3 Gal hot water LED display with digital thermostat Temperatures from 60 - 212°F / 15.6 - 100°C Durable water-resistant exterior Description The Bunn H3X Element is a precision temperature hot water dispenser for medium volume locations. It has a 3 gallon (11.4 litre) tank and a contemporary, low-profile design for front-of-house or self-service use. Its digital thermostat provides consistent and accurate temperatures, programmable from 60° - 212° Fahrenheit (15.6° - 100° Celsius). The "Thinsulate" tank insulation provides increased energy efficiency. The LED display provides simple temperature adjustment. Features: Push and Hold dispense -with one programmable Portion Control setting for a volume of up to 2 gallons (7.5 liters). Digital thermostat provides consistent and accurate temperatures of 15.6-96°C (60-205°F MAX) for the H3EA; 60° - 212°F (15.6° - 100°C) for the H3X. Thinsulate tank insulation provides increased energy efficiency Contemporary, low-profile design for front-of-house and self-service settings. Programmable "Energy Saver Mode" reduces operating costs during idle periods. 7.7" (196mm) cup clearance accommodates a range of serving options for custom-crafted, hand pour coffees and teas. Read more Specifications Specifications Model H3X Element Model 45300.6008 Width 7.5 inches Depth 20.5 inches Height 22.3 inches Temperature Range 60 - 212°F / 15.5 - 100°C Capacity 3 Gallons Wattage 1340 W Electrical 120 V / 60 Hz / 1 Phase Amperage 11.2 A Display Type Digital Control Type Digital Finish Stainless Steel Product Type Hot Water Dispenser NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. UL Certified Certified by Underwriters Laboratories, this product has been stringently tested and meets safety standards. 5-15P This product comes with a NEMA 5-15P plug. Files Spec Sheet

Stainless steel exterior & tank 120 V / 60 Hz / 1 ph 80 Oz. Tank size Steaming hot water constantly Description The space-saving pour-over Bunn 02550.6000 2.37 L Hot Water Dispenser plugs into any 120 volt outlet; no plumbing required. Features: Tank size: 80 Oz (2.37L) Plugs into any 120 volt outlet, no plumbing needed Includes drip tray High quality, easy-to-clean stainless steel exterior and tank for a long, dependable life No waiting- draw hot water anytime–even immediately after refilling Steaming hot water constantly available for fast, hot refreshment preparation – a quick cup at a time Space-saving size to fit anywhere. Just 6.6" (16.8cm) wide and 16.9" (42.9cm) high Water Access: Not Plumbed Finish: Stainless Faucet: Upper Temp. Setting: 200°F / 93.333°C Read more Specifications Specifications Model OHW, 02550.6000 Width 6.50 Inches Depth 10.80 Inches Height 16.90 Inches Capacity 80 Oz. / 2. 37 L Voltage 120 Volts Wattage 1040 Watts Amperage 8.6 Amps Hertz 60 Hz. Phase 1 Material Stainless Steel Temperature Setting 200°F / 93.33°C Product Type Hot Water Dispenser NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. UL Certified Certified by Underwriters Laboratories, this product has been stringently tested and meets safety standards. 5-15P This product comes with a NEMA 5-15P plug. Files Spec Sheet

Dispenses up to 24 gal of boiling water per hour for food prep and cleaning Precise temperature (212F/100C) ensures consistent, high quality results Includes dry-plug prevention for easy installation Prepare large amounts of mashed potatoes, gravy, cheese sauce, gelatin, oatmeal and many more foods Description The Bunn H10X is a large-volume hot water dispenser that can provide up to 24 gallons (90 liters) of hot water per hour at 212°F (100°C). And it has a small footprint, being only 10.2" wide. Read more Specifications Specifications Model H10X-80-208V Width 10.2 Inches Depth 24.5 Inches Height 34.4 Inches Capacity 90.85 Liters / 24 Gallons Voltage 208 Volts Amperage 38.7 Amps Wattage 8050 Watts Hertz 50-60 Hertz Finish Stainless Cord Attached No Temperature Setting 212°F / 100°C Product Type Hot Water Dispenser NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. UL Certified Certified by Underwriters Laboratories, this product has been stringently tested and meets safety standards. Files

Dispenses up to 24 gal of boilling water per hour for food prep and cleaning Precise temperature (212F/100C) ensures consistent, high quality results Includes dry-plug prevention for easy installation Prepare large amounts of mashed potatoes, gravy, cheese sauce, gelatin, oatmeal and many more foods Description The Bunn H10X is a large-volume hot water dispenser that can provide up to 24 gallons (90 liters) of hot water per hour at 212°F (100°C). And it has a small footprint, being only 10.2" wide. Read more Specifications Specifications Model H10X-80-240V Width 10.2 Inches Depth 24.5 Inches Height 34.4 Inches Capacity 90.85 Litres / 24 Gallons Voltage 240 Volts Amperage 33.5 Amps Wattage 8050 Watts Hertz 50-60 Hertz Finish Stainless Cord Attached No Temperature Setting 212°F / 100°C Product Type Hot Water Dispenser NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. UL Certified Certified by Underwriters Laboratories, this product has been stringently tested and meets safety standards. Files

1/4 inche male flare fitting for water inlet 11/2 gpm [507 lpm] minimum flow rate 20-75 psig [276-517 kPa water pressure Cups Per Hour: 8 oz: 131 cups, 12 oz: 87 cups, 16 oz: 66 cups, 52 oz: 74 cups The newly-designed HWD-2102 hot water dispenser meets FETCO’s exacting standards of innovation, reliability, durability and quality. It delivers form, function and flexibility. Simple interface controls makes dispensing hot water intuitive. While operating the unit, simple features allow for efficient use. For instance, users will know the water is hot when the green light is illuminated. Such functions allow for set ups for customer to use on a self-serve basis. Specialized features were implemented in this unit for the benefits on customers. These include a silicone tap which protects against glass and ceramic breakage along with fully insulated walls that retain heat and conserve electricity. No special wiring needed for 110V models - just plug into a regular outlet. Specifications Model HWD-2102 Width 8 inches Depth 16 inches Height 19 inches Empty Weight 19 lbs Filled Weight 36 lbs Voltage 100-120V Phase 1 Phase Wattage 1.5 kW Capacity 24 inches Water Inlet 1/4 inch male flare fitting

Attractive design complements hotel lobbies, service bars or back-of house The integral base makes it easy to create remote coffee stations The brew-through top keeps heat and flavor in sturdy handles and dual function faucet guard provide multiple carrying points for ease of transportation Separate drip tray for easy cup location and cleaning Significant faucet clearance for cup and decanter service Includes sight glass cleaning brush Description The Thermal Gravity Pot® Beverage Dispenser keeps beverages tasting fresh for hours by utilizing the force of gravity to dispense beverages, minimizing oxidation. It features a high quality vacuum glass liner with excellent heat retention. Make sure your coffee brews stay hot with this Thermal Gravity Pot Beverage Dispenser. Read more Specifications Specifications Model AY-AE25 Height 17.13 Inches Width 8.875 Inches Length 8 Inches Heat Retention 172°F @ 10 Hours / 147°F @ 24 Hours Product Type Dispenser NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. Files Brochure

Manufactured to the highest standards, the Bloomfield 1228-DLX automatic water dispenser combines style, function, reliability and value for money with a pioneering new development in water boiler filtration. A water filter is essential, not only in hard water areas to reduce problematic scale build-up, but also to remove impurities that can leave an unpleasant taste. Until now, these filters have always been plumbed in as a separate unit. This is unattractive and adds cost. FilterFlow is ingeniously different. It revolutionizes water boiler design by incorporating the filter cartridge within the boiler casing. Electronic control system Standby mode LCD information panel Supplied with removable drip tray and water feed hose Built-in filtration cartridge 240V / 3,000W Spec Sheet