Hot/Cold Food Well and Soup Well

The 400-CW Cold Well uses proven cold wall conductive cooling to maintain refrigerated food temperature without forced air that dries food out. Higher food quality and reduced waste and food costs means that more money back to your bottom line. Capacity – accepts four (4) full-size (gastronorm) pans. Built to NSF/ANSI Standard 7 – For safe cold food holding. Efficient cooling – Exclusive cold wall conductive cooling transfers cold efficiently through recessed food pans instead of forcing cold only through the bottom of pan or blowing cold air over the of the food and drying it out Specifications Model 400-CW Width 57.25 Inches Depth 27 Inches Height 27.5 Inches Voltage 115 Volts Wattage 600 Watts Amp 5.0 Amps Phase 1 Phase Hertz 60 Hertz Horsepower 1/4 HP Pan Capacity 4 12" x 20" Pan Material Construction Stainless Steel Holding Temperature 41°F / 5°C Energy Type Electric Installation Type Drop-In Product Type Hot Food Well NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. 5-15P This product comes with a NEMA 5-15P plug.

Heavy-duty bottom mount, uninsulated rectangular hot food well is designed for installation in metal countertop. Hot food well accommodates standard size steamtable pans, in conjunction with fabricated counter. Unit is heated by tubular calrod heat element shaped in serpentine fashion for even heat distribution to pan use. Thermostatically controlled for fast heat recovery. Well is constructed of deep-drawn, austenite stainless steel. Units shipped with drain are provided with stainless steel 1/2 NPT drain welded to bottom of pan and provided with removable screen. Element mounted under well and secured by aluminized deflector shield for maximum efficiency. The units are available in a UL recognized component construction with open wires and increase-decrease plate or complete UL Listed construction including electrical conduit, bezel and control box. Specifications Model BM-30D Width 13.8 Inches Depth 21.75 Inches Height 8.3 Inches Voltage 120 Volts Wattage 750 Watts Amp 6.25 Amps Number of Wells 1 Well Material Construction Stainless Steel Energy Type Electric Installation Type Bottom Mount Product Type Hot Food Well NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. UL Certified Certified by Underwriters Laboratories, this product has been stringently tested and meets safety standards. CSA Certified This item has been certified by the Canadian Standards Association.

Wells heavy-duty, top-mount, drop-in, modular food warmer are designed to hold heated food at safe and fresh serving temperatures. Narrow, Slim Line MOD warmers are ideal for narrow counters and are available in two or three well models. Wells MOD 200N Series accommodates two 12 _x009d_ x 20 _x009d_standard food pans or equivalent fractional inset pans while the MOD300N Series accommodates three 12 _x009d_ x 20 _x009d_standard food pans or equivalent fractional inset pans and are designed for wet or dry operation. Each pan is 208/240V, 3 (1 ), 1240/1650W. Additional features include auto water-fill to maintain proper water level, select models are field convertible from 1 to 3 , drains, drains with manifolds, cord & plugs available on thermostatically control models, and infinite or thermostatic controls. Construction – One-piece stainless steel top flange and heavy-gauge, deep-drawn stainless steel warming pans are standard features on all models. Wellsloks are standard for quick and easy installation. Insulation – Sides, front, back and bottom are fully insulated for energy savings, efficiency, quicker pre-heat and faster recovery. Controls & Heating- Individual controls for each well provide maximum versatility. Slim line models feature thermostatic controls. High-limits prevent overheating. Temperature-ready indicator lights are standard on all control types. Powerful tubular heating elements are located under the warming pans for quick and efficient heating and for even heat distribution. Accommodates 12” by 20” standard inset pans or equivalent fractional pans per well One-piece stainless steel top flange and heavy-gauge, deep-drawn stainless steel warming pans Suitable for wet or dry operation (wet recommended for best results) Energy-saving fully-insulated construction Fully Insulated models are perfect for non-metal counters Thermostatic controls standard Separate controls for each individual wells High limits prevent overheating Thermostatic controls are recessed in a one-piece, drawn, front-mounted panel Wellslok standard for ease of installation Powerful tubular heating elements ½” drains and manifolds available 2-Year Limited Parts & 1-Year Limited Labor Warranty Specifications Model MOD-327TDM Width 43.5 Inches Depth 30.56 Inches Height 9.75 Inches Voltage 208/240 Volts Wattage 1240/1650 Watts Phase Convertible from 3 to 1 Phase Number of Wells 3 12" x 27" Well Material Construction Stainless Steel Control Type Thermostatic Feature Drains With Manifolds Energy Type Electric Installation Type Drop-In Product Type Hot Food Well NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. UL Certified Certified by Underwriters Laboratories, this product has been stringently tested and meets safety standards. CSA Certified This item has been certified by the Canadian Standards Association.

Wells heavy-duty, top-mount, drop-in, Modular food warmers are designed to hold heated foods at safe and fresh serving temperatures. Wells MOD100 Series accommodates one 12 _x009d_ x 20 _x009d_ standard food pans or equivalent fractional inset pans and are designed for wet or dry operation. Top mount modular food and liquid warmers are equipped with Wellslok, a uniquely designed turn-out tab that helps secure a built-in unit into the countertop Wet or dry operation. Specifications Model MOD-100TD Width 21.75 Inches Depth 13.75 Inches Height 9.75 Inches Voltage 120 Volts Wattage 1200 Watts Amp 10 Amps Phase 1 Phase Number of Wells 1 Well Material Construction Stainless Steel Control Type Thermostatic Drain Yes Energy Type Electric Installation Type Built-In Product Type Hot Food Well NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. UL Certified Certified by Underwriters Laboratories, this product has been stringently tested and meets safety standards. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. CE Certified This item has been assessed and meets health, safety, and environmental requirements set by CE.

Accommodates three 12” X 20” standard inset pans or equivalent fractional pans One-piece stainless steel top fl ange and heavy-gauge, deepdrawn stainless steel warming pans Suitable for wet or dry operation (wet recommended for best results) Energy-saving fully-insulated construction Fully Insulated models are perfect for non-metal counters Thermostatic or infi nite controls Separate controls for each individual wells High limits prevent overheating Thermostatic controls are recessed in a one-piece, drawn, front-mounted panel Wellslok standard for ease of installation Powerful tubular heating elements ½” drains and manifolds available 2-Year Limited Parts & 1-Year Limited Labor Warranty Thermostatic Controls with Drains, Manifold & Auto-Fill Specifications Model MOD300TDMAF Width 43.5 Inches Depth 23.68 Inches Height 9.75 Inches Voltage 208-240 Volts Wattage Per Well 1240/1650 Phase 3 Phases Number of Wells 3 Wells Material Construction Stainless Steel Control Type Thermostatic Energy Type Electric Installation Type Drop-In Product Type Hot Food Well NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. UL Certified Certified by Underwriters Laboratories, this product has been stringently tested and meets safety standards.

Stainless steel; Type 304 “Heliarc” and spot-welded construction One piece die formed top with reinforcing flanges Fully reinforced, drop in design mounting Plug in operation Control panel is pre-wired at factory, merely Fasten to counter for operation Unit wiring protected with s/s shrouding Choice of control panel mountings available: All wells have individual drains connected to a common manifold and spigot Each well is individually controlled by a variable heat setting thermostat with heat cycling “on/off” pilot light indicator Approved power supply cord with 3 prong end cap Specifications Model HFS-DI-4 Width 57.6 Inches Depth 24 Inches Voltage 208 Volts Wattage 3600 Watts Amp 6.3 Amps Phase 1 / 3 Number of Wells 4 Material Construction Stainless Steel Energy Type Electric Installation Type Drop-In Product Type Hot Food Well NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. CSA Certified This item has been certified by the Canadian Standards Association.

The Built-In Full-Size Insulated Top Mount Heated Well from Hatco holds a variety of hot and fresh foods at safe-serving temperatures, with self-adjusting thermostats that read the actual temperature of the well and add heat only when needed. Fully insulated construction retains heat better, distributing it more evenly amongst the food to maintain product quality and more consistent holding times, while cooler surrounding surfaces guarantee customer safety. Faster pre-heat and recovery improves energy efficiency. HWBI-FULD models are equipped with a drain Specifications Model HWBI-FULD Width 13.7 Inches Depth 21.78 Inches Height 9.45 Inches Voltage 120 Volts Wattage 750 Watts Amp 6.3 Amps Phase Single Material Construction Stainless Steel Energy Type Electric Control Type Thermostatic Installation Type Built-In Product Type Heated Well Made in America This product was made in United States of America. NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. CE Certified This item has been assessed and meets health, safety, and environmental requirements set by CE. UL Classified EPH Complies with UL safety standards and ANSI/NSF standards. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. 5-15P This product comes with a NEMA 5-15P plug.

The Refrigerated Drop-In Well from Hatco is a full-size well that blankets pre-chilled food products to retain optimum freshness and taste. Features auto-defrost, which is activated through a programmable advanced electronic controller. Optimal and environmentally-friendly insulation on the sides and bottom provide even chilling from top to bottom for better cold retention and cost savings. Includes an adjustable condensing unit that can be rotated 90° or 180° for easy venting adjustments and flexibility. Specifications Model CWB-4 Width 58 Inches Depth 27 Inches Height 25.5 Inches Voltage 120 Volts Wattage 1044 Watts Amp 8.7 Amps Phase Single Horsepower 1/3 HP Capacity 4 12"x20" Pan Material Construction Stainless Steel Energy Type Electric Installation Type Drop In Product Type Cold Well Made in America This product was made in United States of America. NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. 5-15P This product comes with a NEMA 5-15P plug.

The Hatco Drop-In Hot/Cold Well provides the ultimate flexibility and versatility, incorporating both a Refrigerated Well and Heated Well into one cold/hot well unit to hold pre-chilled and hot foods at their optimum serving temperatures. Includes auto-defrost, easy serviceability, optimal insulation and an efficient condenser for the Refrigerated Well. Utilizes the Hydro-Heater Food Rethermalizer/Bain-Marie Heater with “free-flow” technology for an efficient and safe operation with a longer life for the Heated Well. Features simple controls for ease of use and adjustable set-points to keep particular foods at their preferred temperatures. Specifications Model CWB-2 Width 32 Inches Depth 27 Inches Height 25.5 Inches Voltage 120 Volts Wattage 804 Watts Amp 6.7 Amps Phase Single Horsepower 1/4 HP Capacity 2 12"x20" Pan Material Construction Stainless Steel Energy Type Electric Installation Type Drop In Product Type Cold Well Made in America This product was made in United States of America. NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. 5-15P This product comes with a NEMA 5-15P plug.

The Refrigerated Drop-In Well from Hatco is a full-size well that blankets pre-chilled food products to retain optimum freshness and taste. Features auto-defrost, which is activated through a programmable advanced electronic controller. Optimal and environmentally-friendly insulation on the sides and bottom provide even chilling from top to bottom for better cold retention and cost savings. Includes an adjustable condensing unit that can be rotated 90° or 180° for easy venting adjustments and flexibility Specifications Model CWB-1 Width 19 Inches Depth 27 Inches Height 25.5 Inches Voltage 120 Volts Wattage 804 Watts Amp 6.7 Amps Phase Single Horsepower 1/4 HP Pan Capacity 1 12"x20" Pan Material Construction Stainless Steel Energy Type Electric Installation Type Drop In Product Type Cold Well Made in America This product was made in United States of America. NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. UL Certified Certified by Underwriters Laboratories, this product has been stringently tested and meets safety standards. 5-15P This product comes with a NEMA 5-15P plug.

Wells Refrigerated Drop-In Cold Pans hold pre-chilled food products at cold, fresh and safe serving temperatures. All models are completely self-contained in one to six-pan models with individual thermostatic controls, are CFC free and include an 8 ft. 120V cord and plug. Pans are recessed 3” to comply with NSF-7 performance requirements. 3” recessed top edge to comply with NFS-7 requirements Self contained drop-in design Hold standard 12” by 20” food pans and fractional sized pans Stainless steel top and liner for maximum strength and durability 1” drains for ease of cleaning On-off switch with 8 ft cord & plug for ease of installation and operation Type 134A or 404A CFC free refrigerant Fully insulated, CFC free, foamed-in place insulation keeps food cold while saving energy Recessed ledge for pan support and colder, fresher products Quick & easy service with sight glass, service valves, fi lter/ dryer and receiver Limited 1 year parts & labor warranty Specifications Model RCP-7300 Width 46.5Inches Depth 27.12 Inches Height 26.12 Inches Voltage 115 Volts Amp 5.5 Amps Horsepower 1/3 HP Phase Single Pan Capacity 3 12" X x20" Pan Material Construction Stainless Steel Energy Type Electric Installation Type Drop In Product Type Cold Well Made in America This product was made in United States of America. NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. UL Certified Certified by Underwriters Laboratories, this product has been stringently tested and meets safety standards. 5-15P This product comes with a NEMA 5-15P plug.

Exterior : Top is one-piece stainless steel. Sides are wrapped with refrigeration lines. Sides and bottom are fully insulated with high-density environmentally friendly closed-cell polyurethane. Exterior housing is galvanized steel. Interior: Interior liner is stainless steel and is creased to a 1.00" (2.5cm) diameter drain. 4 pan models and larger have two drains. A stainless steel bracket, flush with the top helps to accommodate 12" x 20" (30cm x 51cm) pans with 4" (10cm) or 6" (15cm) deep supplied by others. Product temperatures of 33°F (1°C) to 41°F (5°C) are maintained at 86°F (29°C) ambient room temperature, meeting NSF 7 requirements. Adapter bars for 12" x 20" (30cm x 51cm) pans are standard. Refrigeration System: Refrigeration system uses HFC-404A refrigerant. Condensing unit is suspended below the cold pan on a 16-gauge steel frame and uses HFC-404a refrigerant. Temperature controlled by a low-pressure control with separate ON/OFF switch and defrost timer. Unit is supplied with expansion valve. Evaporator coil cools pans by air flowing over and under pans. Stainless Steel Louver A stainless steel louver is provided for field installation on the front of the cabinet, 4" below top of counter; cut-out dimension for each is 12" x 23.5" (30.5cm x 59.7cm). A second opening 11" x 22" (28cm x 56cm) at the rear of the cabinet should be provided at installation to allow for proper air circulation. Electrical System Electrical system is 115V/60Hz/1Ph with NEMA 5-15 plug on the N8131-FA, N8144-FA and N8157-FA models. The N8169-FA and N8182-FA models come with a NEMA 5-20 plug. Specifications Model N8144-FA Width 43 Inches Depth 25.5 Inches Height 26.62 Inches Voltage 115 Volts Hertz 60 Amps Phase Single Horsepower 1/2 HP Pan Capacity 3 12"x20" Pan Material Construction Stainless Steel Energy Type Electric Installation Type Drop In Product Type Cold Well Made in America This product was made in United States of America. NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. UL Certified Certified by Underwriters Laboratories, this product has been stringently tested and meets safety standards. UL Certified Certified by Underwriters Laboratories, this product has been stringently tested and meets safety standards. 5-15P This product comes with a NEMA 5-15P plug.

Exterior : Top is one-piece stainless steel. Sides are wrapped with refrigeration lines. Sides and bottom are fully insulated with high-density environmentally friendly closed-cell polyurethane. Exterior housing is galvanized steel. Interior: Interior liner is stainless steel and is creased to a 1.00" (2.5cm) diameter drain. 4 pan models and larger have two drains. A stainless steel bracket, flush with the top helps to accommodate 12" x 20" (30cm x 51cm) pans with 4" (10cm) or 6" (15cm) deep supplied by others. Product temperatures of 33°F (1°C) to 41°F (5°C) are maintained at 86°F (29°C) ambient room temperature, meeting NSF 7 requirements. Adapter bars for 12" x 20" (30cm x 51cm) pans are standard. Refrigeration System: Refrigeration system uses HFC-404A refrigerant. Condensing unit is suspended below the cold pan on a 16-gauge steel frame and uses HFC-404a refrigerant. Temperature controlled by a low-pressure control with separate ON/OFF switch and defrost timer. Unit is supplied with expansion valve. Evaporator coil cools pans by air flowing over and under pans. Stainless Steel Louver A stainless steel louver is provided for field installation on the front of the cabinet, 4" below top of counter; cut-out dimension for each is 12" x 23.5" (30.5cm x 59.7cm). A second opening 11" x 22" (28cm x 56cm) at the rear of the cabinet should be provided at installation to allow for proper air circulation. Electrical System Electrical system is 115V/60Hz/1Ph with NEMA 5-15 plug on the N8131-FA, N8144-FA and N8157-FA models. The N8169-FA and N8182-FA models come with a NEMA 5-20 plug. Specifications Model N8157-FA Width 56.75 Inches Depth 26.66 Inches Height 26.62 Inches Voltage 115 Volts Hertz 60 Amps Phase Single Horsepower 1/2 HP Pan Capacity 4 12"x20" Pan Material Construction Stainless Steel Energy Type Electric Installation Type Drop In Product Type Cold Well Made in America This product was made in United States of America. NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. UL Certified Certified by Underwriters Laboratories, this product has been stringently tested and meets safety standards. UL Certified Certified by Underwriters Laboratories, this product has been stringently tested and meets safety standards. 5-15P This product comes with a NEMA 5-15P plug.

Wells Refrigerated Drop-In Cold Pans hold pre-chilled food products at cold, fresh and safe serving temperatures. All models are completely self-contained in one to six-pan models with individual thermostatic controls, are CFC free and include an 8 ft. 120V cord and plug. Pans are recessed 3” to comply with NSF-7 performance requirements. 3” recessed top edge to comply with NFS-7 requirements Self contained drop-in design Hold standard 12” by 20” food pans and fractional sized pans Stainless steel top and liner for maximum strength and durability 1” drains for ease of cleaning On-off switch with 8 ft cord & plug for ease of installation and operation Type 134A or 404A CFC free refrigerant Fully insulated, CFC free, foamed-in place insulation keeps food cold while saving energy Recessed ledge for pan support and colder, fresher products Quick & easy service with sight glass, service valves, fi lter/ dryer and receiver Limited 1 year parts & labor warranty Specifications Model RCP-7200 Width 32.75 Inches Depth 27.12 Inches Height 26.12 Inches Voltage 115 Volts Amp 4.9 Amps Horsepower 1/4 HP Phase Single Pan Capacity 2 12" X x20" Pan Material Construction Stainless Steel Energy Type Electric Installation Type Drop In Product Type Cold Well Made in America This product was made in United States of America. NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. UL Certified Certified by Underwriters Laboratories, this product has been stringently tested and meets safety standards. 5-15P This product comes with a NEMA 5-15P plug.

20-gauge stainless steel top construction 2 BF stainless steel interior liner wrapped and spot clipped with refrigeration lines; thermal transfer compound is applied for superior cooling Adapter bars are provided standard for 12” x 20” openings Standard 1” plastic drain High density Environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane foam insulation throughout unit Galvanized exterior body Non-marring press fit top gasket Condensing unit is suspended below on a 16-gauge galvanized frame HFC-404A refrigerant 8’ cord and plug Stainless steel louver provided for field installation One year parts and 90 day labor standard warranty" Specifications Model N8169B Width 69 Inches Depth 26 Inches Height 21.87 Inches Voltage 115 Volts Hertz 60 Hertz Phase 1 Phase Amp 7.3 Amps Capacity 5 12" X 20" Pan Control Type Thermostatic Material Construction Stainless Steel BTU Load 948 Energy Type Electric Product Type Cold Well NSF Certified This item meets NSF's standards that focuses on public health protection, ensuring the item is designed and constructed in a way that promotes food safety. UL Certified Certified by Underwriters Laboratories, this product has been stringently tested and meets safety standards. UL Canada & USA Certified by Underwriters Laboratories, this product has been stringently tested and meets US and Canada's safety standards. 5-15P This product comes with a NEMA 5-15P plug.